Security
| Type |
Wired |
| Outdoor range |
12m x 12m |
| Sensor type |
Passive infrared (PIR) sensor |
Power
| Input voltage |
9 - 15 V |
| Standby current |
10 mA |
10 mA, 9VDC, -30 °C - +55 °C, white
The Blue Line Gen2 PIR Motion Detectors (ISC-BPR2) use two Fresnel lenses designed to produce sharply-focused images throughout the field of view providing superior response to intruders. These lenses provide a high density (77 zone) 7‑layer pattern, and the selectable lookdown lens provides an additional three lookdown zones. Easy installation and flexible mounting options provide state-of-the-art detection. The pet‑friendly (-WP) generates alarm signals for human intruders without generating false alarm signals for pets.
<b>First Step Processing (FSP)</b>
First Step Processing (FSP) almost instantly responds to human targets without producing false alarms from other sources. FSP adjusts the detector's sensitivity based on signal amplitude, polarity, slope, and timing. This eliminates the need for the installer to select the sensitivity level, thus improving ease of installation and reliability.
<b>Pet‑friendly Selectivity (‑WP models only)</b>
The installer can turn pet immunity on or off based upon application requirements. When pet immunity is turned off, the detector provides superior catch performance identical to the non‑pet models. When pet immunity is turned on, the detector can distinguish between signals caused by humans and signals caused by pets. It ignores signals caused by one or two pets up to 20 kg (45 lb) or numerous rodents.
<b>Dynamic Temperature Compensation</b>
The detector intelligently adjusts its sensitivity so that it can identify human intruders at virtually any
temperature.
<b>Wall-to-Wall Coverage</b>
An improved lookdown zone and coverage range of 12 m x 12 m (40 ft x 40 ft) provide wall-to-wall
coverage.
<b>Self-locking Enclosure</b>
The sliding self‑locking enclosure has an integrated bubble level and custom gap‑free, lift‑gate style
terminal blocks to make installation easier.
<b>Sealed Optics and Electronics</b>
The optics and electronics are assembled into the front enclosure and sealed with a protective cover to prevent damage during installation. The sealed optical chamber also prevents drafts and insects from affecting the detector.
<b>Test Features</b>
Externally visible alarm LED can be disabled after installation.
