Networking
| Cabling technology |
1000Base-T, 1000Base-LX, 1000Base-SX |
Other features
| Fiber type |
9/125 µm |
| Power budget |
12.5 dB |
| Full duplex |
Y |
| Interface |
RJ-45, SC (2.5mm) |
| Compliance industry standards |
IEEE 802.3ab, IEEE 802.3z |
| Operating temperature (T-T) |
32 - 122 °F |
Performance
| Maximum transfer distance |
10000 m |
| Wavelength |
1310 nm |
Operational conditions
| Operating altitude |
0 - 3048 m |
Additionally
| Transfer rate (Mbps) |
1000 Mbit/s |
| Wireless technologies |
Wired |
iMcV-Gigabit, TX/SSBX-SM1310-SC, 1310xmt/1490rcv, 1000Mb/s, 10km
iMcV-Gigabit: 1000 Mbps Gigabit UTP to Fiber
Satisfying today’s networking needs while preparing for tomorrow’s requirements in cabling bandwidth, distance and security can make designing and installing the physical layer of networks a daunting task. The decreasing cost of fiber optic cabling and switching equipment makes all-optical LANs the obvious choice when future-proofing a network. Replacing legacy equipment and the wiring infrastructure is a costly choice that could produce too much network downtime. Managed media conversion allows the implementation of new technologies on an existing network and the monitoring of all connections to keep networks up-to-date and running in peak condition.
iMcV-Gigabit converters support multi-mode, single-mode, single-strand and CWDM fiber types with ST or SC connectors. Additionally, the iMcV-Gigabit supports Config Control, a feature that retains the latest configuration on the module regardless of how the initial configuration was setup; whether through DIP Switch settings or the SNMP Management Module's configuration. This feature is beneficial when:
- changing the settings of a currently installed iMcV-Module through iView2;
- replacing the same type of iMcV-Module;
- installing a new or different type of iMcV-Module.
iMcV-Gigabit series modules are SNMP manageable with IMC Networks' free iView2 management application software, or with any popular SNMP software such as HP OpenView™. iView2 software features an easy-to-use and intuitive Graphical User Interface that enables the configuring, monitoring and managing of installed media modules from a central location. Via iView2 network managers can receive real-time unit and port status information, as well as configure individual modules for various features.
iView2 also includes automatic updates for software and device firmware, and event/trap management for IMC Networks' and other manufacturers' devices installed in the network. iView2 runs standalone on Windows NT/XP/2000; as a standalone Java Application for other operating systems; as a plug-in module for HP OpenView; as a Web Server running under IIS or as a Java Web Servlet.
iMcV-Gigabit and IE-iMcV-Gigabit modules install in managed iMediaChassis and unmanaged MediaChassis.
Features:
- Includes LinkLoss and FiberAlert features for cabling troubleshooting;
- Automatic MDI/MDIX;
- Supports GUI-based iView2;
- Includes diagnostic and status LEDs;
- Supports Config Control;
- Features Link Fault Pass-Through (LFPT).
