Other features
Packet transfer speed |
1916 |
Fiber type |
50/125, 62.5/125 µm |
Full duplex |
Y |
Interface |
RJ-45, SC (2.5mm) |
Compliance industry standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
Operating temperature (T-T) |
32 - 122 °F |
Networking
Cabling technology |
10/100Base-T(X), 100Base-FX, 100Base-SX |
Performance
Maximum transfer distance |
300 m |
Wavelength |
850 nm |
Operational conditions
Operating altitude |
0 - 3048 m |
Additionally
Transfer rate (Mbps) |
100 Mbit/s |
Wireless technologies |
Wired |
iMcV-MediaLinX, TX/FX-MM850-SC, 10/100Mb/s, 300m
The iMcV-MediaLinX series offers the most flexible Ethernet switching media converters in the industry.
Dissimilar media types, protocols and duplex settings can make LAN internetworking and Fiber-to-the-Subscriber projects challenging undertakings. For example, if the service provider network infrastructure is 100 Mbps or Gigabit fiber but the customer wants to receive a standard 10 Mbps Ethernet interface to their LAN, making the connection between the two network segments can be difficult. The complexity of today's mixed media networks and the increasing demand for bandwidth requires access equipment that is both flexible in connecting different media types and scalable between different speeds.
Convert speed, media and duplex mode:
The iMcV MediaLinX series of switching media converters offers service providers and enterprise networks unparalleled flexibility in connecting copper-based networks to Fast Ethernet or Gigabit fiber optic infrastructures.
The SNMPmanageable MediaLinX converters allow device managers to use Auto-Negotiation functionality on the twisted pair port for plug-and-play operation, or to manually configure the port for the desired speed and duplex mode. What's more, you can even set the fiber port for Half- or Full-Duplex operation (10/100 Mbps only).
iThe iMcV MediaLinX series also includes troubleshooting features and LEDs to assist in network diagnostics as well as make isolating cable breaks easier should they occur. In addition, hot-swappable MediaLinX modules significantly reduce operation costs by allowing other modules within the same chassis to remain up and running during product upgrades, maintenance and troubleshooting.
Features:
Same unit converts speed, media and duplex mode!
- Configure twisted pair port for AutoNegotiation or force the speed;
- Twisted pair and fiber ports can be individually configured for Half- or FullDuplex operation.
Easy to configure and manage with GUI-based iView2
- Up and running in less than 5 minutes;
- Easily adjust settings when user requirements change;
- Easy upgrades; no user intervention or visits to remote locations required;
- Monitor and control all connections.
Meets a variety of installation requirements
- Available for multi-mode or single-mode fiber;
- Available for single-strand fiber.
Eases Troubleshooting
- LinkLoss, FiberAlert, SNMP management and LEDs assist in diagnosing problems on fiber optic networks.