Networking
| Duplex system |
Full, Half |
| Converter input interface |
100Base-TX, 10Base-T |
| Converter output interface |
100Base-FX |
| Ethernet LAN data rates |
10, 100 Mbit/s |
Performance
| Tx power (min) |
-24 dBmW |
| Fiber cable diameters supported |
50/125, 62.5/125, 100/140 µm |
| Link budget |
7 dB |
| Rx power (min) |
-31 dBmW |
| Rx power (max) |
-14 dBmW |
| Fiber mode structure |
Multi-mode |
| Maximum transfer distance |
5000 m |
| Tx power (max) |
-14 dBmW |
| Wavelength |
1310 nm |
Power
| Power over Ethernet (PoE) |
N |
| External power adapter |
Y |
| Input frequency |
60 Hz |
| Input voltage |
100 V |
Operational conditions
| Operating altitude |
-100 - 4000 m |
Additionally
| Transfer rate (Mbps) |
100 Mbit/s |
| Wireless technologies |
Wired |
| Ethernet LAN (RJ-45) ports quantity |
1 |
10/100BASE-T UTP to 100BASE-X Intelligent Media Converter and Network Interface Device, MM/DF, ST, 5km
The iConverter 10/100M conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities. The 10/100M features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.
The 10/100M is available as a compact standalone unit or as a chassis plug-in module. The hot-swappable 10/100M plug-in module can be mounted in a 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.
The plug-in module can manage other modules in the same chassis and operate as a managed 10/100 media converter. It features two Ethernet backplane ports for connectivity to adjacent modules in a chassis for multi-port and multi-service configurations.
The standalone 10/100M is available as a tabletop or wall-mount unit. The tabletop model can be DIN-rail mounted using an optional DIN-rail mounting kit. Both the tabletop and the wall-mount models are DC powered and are available with an external AC/DC power adapter or a terminal connector for DC power. The 10/100M standalone unit combines management capability with a compact chassis for deployment at the demarcation point.
