Networking
Cabling technology |
100BASE-FX |
Power
External power adapter |
N |
Input current |
0.5 A |
Performance
Fiber mode structure |
Multi-mode, Single-mode |
Maximum transfer distance |
30000 m |
Wavelength |
1310 nm |
Operational conditions
Operating altitude |
-100 - 4000 m |
Additionally
Transfer rate (Mbps) |
100 Mbit/s |
Wireless technologies |
Wired |
100BASE-FX, SM/MM, SC/SC, SF, 1310 nm, 30 km max
100BASE-FX Single-Mode to Multimode Managed Fiber Converter
- 100BASE-FX single-mode to multimode fiber converter
- Supports multimode, single-mode and single-fiber with SC and ST connectors
- Supports distances up to 120km or longer
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Conforms to IEEE 802.3 and 100BASE-FX specifications
- Lifetime Warranty and free 24/7 Technical Support
The iConverter 100FF managed media converter provides multimode to single-mode and dual fiber to single fiber conversion, and is a cost-effective solution for extending fiber network distances.
iConverter 100FF models are available with multimode, single-mode and single-fiber options. The single-mode fiber port supports ST or SC connectors and distances up to 120km. The multimode fiber port supports ST or SC connectors and distances up to 5km.
The 100FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.
The iConverter 100FF is available as a compact, unmanaged standalone unit, or as a chassis plug-in module that can be managed with a management module installed in the chassis. The hot-swappable plug-in module can be mounted in a high-density 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.
The standalone 100FF can be wall-mounted and is DC powered. It can be ordered with an external AC/DC power adapter, or it can be directly powered using a 2-pin terminal connector.