Networking
| Cabling technology |
100BASE-FX |
| Duplex system |
Full, Half |
Other features
| Receive power |
-31 - -3 dBmW |
| Transmit power |
-5 - 0 dBmW |
Performance
| Fiber mode structure |
Single-mode |
| Maximum transfer distance |
60000 m |
| Wavelength |
1310 nm |
Operational conditions
| Operating altitude |
-100 - 4000 m |
Additionally
| Transfer rate (Mbps) |
100 Mbit/s |
| Wireless technologies |
Wired |
100BASE-FX / 100BASE-FX, DF, SM, SC, 1310 nm, 60 km, 26 dBm
100BASE-FX to 100BASE-FX Managed Fast Ethernet Media Converter & Switch
- 100BASE-FX to 100BASE-FX Fast Ethernet fiber media converter and switch
- Supports multimode, single-mode, and single-fiber with ST, SC, MT-RJ and LC connectors
- Ethernet backplane ports for in-band management and expansion to adjacent modules
- Supports IEEE 802.1Q Tag VLAN, Q in Q and Port VLAN
- Supports IEEE 802.1p Prioritization QoS
- Individual Port Bandwidth and Port Access Controls
- Per port MIB statistics
- Flash-upgradable memory option
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook provides real-time port status, parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- Lifetime Warranty and free 24/7 Technical Support
The iConverter 2Fx managed media converter is a member of the modular iConverter product family. The 2Fx provides a cost effective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling. The iConverter 2Fx both regenerates and re-times the fiber optic signal, and multiple 2Fxs can be used to extend total network distances.
iConverter 2Fx models are available with multimode, single-mode, or single-fiber options, and support ST, SC, MT-RJ and LC connectors.
The iConverter 2Fx features two 10/100 Ethernet backplane ports to provide connectivity to adjacent modules for network expansion and provides additional fiber ports for iConverter modular NIDs.
The iConverter 2Fx supports the IEEE 802.1Q and 802.1p standards. It supports the 802.1Q VLAN packet tagging and untagging for segregating data in Enterprise networks, and enables secure separation of Service Provider network management and customer data.
The 802.1Q Q-in-Q stacked tags enable Service Providers to offer their customers secure Ethernet Virtual Private Line services which isolates each customer's data traffic, as well as the Service Provider's management traffic.
The iConverter 2Fx features Port VLAN, which can be configured to restrict traffic flow between the module's fiber, UTP and backplane ports to improve security and intrusion protection. The 802.1p prioritization enables delivery of Quality of Service (QoS) to high-priority, real-time applications such as voice and video over Ethernet.
The iConverter 2Fx supports Bandwidth and Port Access Controls. Bandwidth Control enables the network administrator to selectively deliver eight different levels of traffic bandwidth to different ports, thereby limiting the bandwidth allocated to individual users. The Port Access Control enables the network administrator to easily control and deny individual port access while maintaining port configuration for easy port re-enabling.
The 2Fx features user-selectable Link Propagate, Link Segment, Remote Fault Detection, and Symmetrical Fault Detection modes to facilitate quick fault detection, isolation and reporting.
iConverter 2Fx modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
