Networking
| Cabling technology |
1000BASE-SX/LX,1000BASE-T |
| Duplex system |
Full, Half |
Other features
| Receive power |
-23 - 3 dBmW |
| Transmit power |
-5 - 0 dBmW |
Power
| External power adapter |
N |
| Input current |
1.4 A |
Performance
| Fiber mode structure |
Single-mode |
| Maximum transfer distance |
80000 m |
| Wavelength |
1550 nm |
Operational conditions
| Operating altitude |
-100 - 4000 m |
Additionally
| Transfer rate (Mbps) |
1000 Mbit/s |
| Wireless technologies |
Wired |
| Ethernet LAN (RJ-45) ports quantity |
1 |
1000BASE-T / 1000BASE-SX/LX, SM, SF, SC, 80 km, 1550 nm, 18 dBm
1000BASE-T to 1000BASE-SX/LX Managed Media Converter
The iConverter Gx modules are not supported in future software releases and are not recommended for new designs or deployments. View the iConverter Gx AN web page.
- The iConverter Gx is an IEEE 802.3ab compatible 1000BASE-T UTP to 1000BASE-X fiber converter
- Supports multimode, single-mode and single-fiber
- 1000Mbps UTP port with Half or Full-Duplex auto-negotiation
- UTP auto-crossover feature eliminates the need for a crossover cable
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support
The iConverter Gx managed media converters are members of the modular iConverter product family, and provide 1000BASE-T UTP to 1000BASE-X fiber conversion.
The iConverter Gx models are available in multimode, single-mode, and single-fiber options. The Gx supports ST, SC, MT-RJ, and LC connectors. The UTP port supports 1000BASE-T in either Half or Full-Duplex mode. The UTP auto-crossover feature eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.
The iConverter Gx features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.
iConverter Gx modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. It can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
