Omnitron iConverter xFF Internal 4250Mbit/s Multi-mode,Single-mode network media converter

SFP / SFP, 100/1000BASE-X, SFP - LC SFP to SFP Protocol-Transparent Media Converter and WDM Transponder

- SFP to SFP protocol-transparent fiber converter
- Supports Ethernet, Fast Ethernet, Gigabit Ethernet, SONET (OC-3/12/48), SDH (STM-1/4/16) and
- 1x/2x/4x Fibre Channel applications
- Supports SFP Digital Diagnostic Monitoring Interface (DDMI) bus
- Provides multimode to single-mode and dual to single-fiber media conversion
- Provides wavelength conversion for CWDM applications
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook provides real-time port and module information, configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Conforms to IEEE 802.3 specifications
- Lifetime Warranty and free 24/7 Technical Support

The iConverter xFF is a protocol-transparent media converter that provides reliable and cost-effective conversion between different wavelengths, multimode and single-mode, and dual and single-fiber.

TheiConverter xFF operates as a protocol and rate-transparent device, supporting Small Form Pluggable (SFP) transceivers with data rates from 1Mbps to 4.25Gbps. The xFF supports a variety of network protocols, including Ethernet, Fast Ethernet, Gigabit Ethernet, SONET (OC-3/12/48), SDH (STM-1/4/16) and 1x/2x/4x Fibre Channel protocols.

The iConverter xFF supports multimode, single-mode and single-fiber SFP transceivers. SFPs allow adaptability to different fiber types, distances and wavelengths, providing maximum flexibility across a variety of network architectures and topologies. The same xFF media converter can utilize a variety of SFPs for different wavelengths and distances, reducing costs and simplifying inventories.

SFP transceivers enable the xFF to operate as a Coarse Wave Division Multiplexing (CWDM) transponder, which converts an optical signal from legacy fiber equipment to a specific CWDM wavelength. CWDM technology increases the bandwidth capacity of the fiber infrastructure by overlaying multiple signals, each using a different wavelength, over an existing fiber link.

There is no manual configuration required with the plug-and-play iConverter xFF. Connect the fiber cables to the appropriate interface and the installation is complete.

The xFF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

The iConverter xFF is available as a compact, unmanaged standalone unit, or a chassis plug-in module that can be managed with a management module installed in the chassis. The hot-swappable, plug-in module can be mounted in a 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.

The standaloneiConverter xFF is an unmanaged wall-mount unit. The wall-mount models are DC powered and are available with an external AC/DC power adapter, or a terminal connector for DC power.