其他功能
运行温度范围(T - T) |
32 - 122 °F |
传输距离(最大) |
2 km |
另外
数据传输率(最大) |
100 Mbit/s |
以太网路(RJ-45)连接接口数量 |
1 |
连接方式 |
Wired |
100BTX-100BFX, MMF, POE, 1310nm, SC, 2km
ADD-FMCPD-FX-SC is a 10/100Base-TX to 100Base-FX media converter, which converts 100Base Copper to 100Base-FX via a 1310nm single-mode fiber (SMF) SC Connector, which allows reach distance up to 2km. Complied with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.
AddOn - Network Upgrade Media Converters and Network Interface Cards are 100% compliant for all of our networking needs. ADD-FMCPD-FX-SC provides a cost effective conversion from 100Base Copper to 100Base-FX fiber, while extending your network reach beyond the 100m reach limitation of copper.