系统要求
| 可支持的Mac操作系统 |
Y |
| 可支持的Linux操作系统 |
Y |
技术细节
| 风扇直径 |
80 mm |
| 接口 |
SATA |
| 风扇数量 |
2 fan(s) |
| 支持的介质类型 |
M2 SATA SSD, mSATA SSD, 2.5" HDD/SSD |
| 传输速率 |
260 MB/s |
| 复印机操作模式 |
Erase, Copy |
| 同时拷贝数量 |
11 copies |
Duplicator, >4TB, 260MB/sec, Black
The new family of Addonics Jasper II Duplicator is one the fastest and most advanced drive duplicators in the market.
High Performance
The Jasper II Duplicator can copy at a rate up to 260 MB/sec, more than twice the performance of most duplicators in the market. Whereas the performance of most duplicators declines with increasing load, the duplication speed on a Jasper II duplicator remains the same regardless of number of drives in the copying process.
Expandable
Unlike traditional duplicator that is designed for a fixed number of targets, the duplicating capacity of a Jasper II Duplicator can be expanded by connecting multiple units together. So if you have three Jasper II duplicators with 3 targets, 11 targets and 19 targets, you can connect all three together to turn them into a 1:35 duplicators. Or you can connect two 1:11 Jasper II duplicators together to form a 1:23 duplicator.
Flexibility
Since the Jasper II Duplicator can be connected together, different type of media can be easily mixed in the duplication. For example, a Jasper II 3.5" drive duplicator can be connected to a Jasper II 2.5" drive duplicator which then connect to a mSATA duplicator. In this set up, a 3.5" source drive can be copied onto 2.5 drive or mSATA card all at the same time. To use different media as the source, you would just need to move the appropriate type of Jasper II duplicator to the beginning of the chain. So instead of having the Jasper II 3.5" drive duplicator as the first duplicator in the chain, you can either move the Jasper II 2.5" duplicator or the Jasper II mSATA duplicator to be the first unit in chain.
This Jasper II 11M is a 1:11 high performance and expandable duplicator for M2 SATA SSD, mSATA SSD and 2.5" HDD/SSD. The duplicator makes copies from one to eleven (11) drives at one time with a mix of any of the supported drives at speed up to 260 MB/sec. Drives are loaded directly into the duplicator with no special tools required. Comes bundled with twelve (12) 2.5" M2/mSATA drive kits, either the M2 or mSATA SSD is loaded into the duplicator just like a standard 2.5" hard drive. By adding different optional 2.5" flash drive kits, this duplicator can also copy other flash cards such as CFast card, CF card, micro SATA drive or slim SATA drive.
