音频
功放分类 |
A/B |
低音提升 |
-10 - 10 dB |
频率范围 |
10 - 65000 Hz |
输入阻抗 |
10000 Ω |
输入灵敏度 |
550 mV |
内置分频器 |
N |
峰值功率每通道 |
80 W |
RMS每声道输出功率(8 Ohm) |
80 W |
声道串扰 (1kHz) |
100 dB |
信号-噪声比(信噪比) |
90 dB |
端口 & 界面
线路输入(RCA) |
1 |
XLR 音讯连接输入端口 |
N |
DC-IN插口 |
N |
线路输出(RCA) |
1 |
音频(左、右声道)输出 |
1 |
耳机输出端口 |
1 |
PRE OUT端口 |
Y |
音箱选择 |
A+B |
AC(电源)输入 |
Y |
技术细节
冷却方式 |
Passive |
远程控制类型 |
IR |
均衡器 |
Y |
手持式遥控器 |
Y |
多区域功能 |
Y |
高音调整 |
Y |
低音调整 |
Y |
最大输入水平 |
1.25 V |
Integrated Amplifiers MAP 102
The amplifier MAP102 represents a true technological achievement.
He meets the classical functions and technological requirements of an audiophile amplifier, and meets also new functions such as PC input, i-Pod inputby jack 3.5 mm, and a MP3 input by USB key.
With the MAP102, nothing was left to chance. All the components are sound-friendly and its large toroidal transformer guarantees a high reserve of power, as well as a delicate and subtle rendering of your favorite music.
Besides, the amplifier MAP102 is of an outstanding design in its category. Indeed, a "HIGH BIAS" switch on the rear panel of the device enables to commute the amplifier in class A* up to 16 Watts. Beyond this limit, the amplifier commutes automatically in class AB** to reach an output of 80 Watts per channel.
A tone control Bass/Medium/Treble ( can be disconnected) permits to adjust the different frequencies for those who want. And 4 equalization curves for i-Pod and USB inputs, as a High Level function to optimize the i-Pod level.
The numerous plugs available enable many connections to different sources, such as a phono input for a turntable equipped with a magnet moving cartridge as well as a plug for a headset. It is also possible to disconnect the pre amplifier section, from the amplifier section, to use a subwoofer for example.
A remote control device delivered with MAP102 will make it easier to use.
* Class A imposes a constant current in the power transistors whatever the requested power ( up to 16 Watts, in the case of MAP102), which significantly improves the dynamic response of the amplifier.
** Clas AB adjusts a variable current in the power transistors according to the requested power.