联网
布线技术 |
10/100/1000BASE-T(X) |
其他功能
全双工传输 |
Y |
接口 |
RJ-45, SC |
遵守工业标准 |
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
另外
数据传输率(最大) |
1000 Mbit/s |
连接方式 |
Wired |
AT-MC1004-20 - 1000T - 1000SX, MDI/MDI-X, MissingLink, wall or rack-mountable: AT-MCR12
Overview
The AT-MC1004 Ethernet media converter is designed to extend the distance of your network by interconnecting LAN devices that are physically separated by large distances.These media converters have the functionality to connect any managed/unmanaged 1000Mbps (1Gbps) switch or hub using standard 1000T RJ-45 connections and convert the signal to a 1000SX port.
Extend the Distance of Ethernet
For the AT-MC1004, the fiber optic port has a fixed multi-mode fiber 1000SX (SC) connector
and a maximum operating distance of 550m.
Cost-effective Migration
Although the provisioning of Gigabit Ethernet connections is becoming relatively inexpensive, thanks in part to the availability of lower-cost copper Gigabit network adapters, the distance limitations of copper cabling make fiber
segments a necessity in most networks. Small, comparatively inexpensive copper to fiber
Gigabit Ethernet media converters present a simple and very cost-effective way of connecting
Gigabit Ethernet LANs over extended distances.
Standalone or Rack-mounted
Each small media converter is powered by an external power supply unit for use in standalone
applications. Where multiple media converters are used, up to 12 standalone devices can be
inserted into a low-cost AT-MCR12 rack-mount chassis, allowing all the converters to be
powered by a single internal power supply. In critical applications, a second load sharing
internal power supply can be installed into the rack-mount chassis.