安全
| 认证方法 |
104-bit WEP, WPA-EAP, WPA2-EAP, AES-CCM, FIPS 197 AES |
性能
| VLAN支持 |
Y |
| 带宽 |
2.4 GHz |
| 支持服务质量（QoS） |
Y |
能量控制
| 支持以太网（PoE） |
Y |
| 输入电压 |
24 V |
| 输入电流 |
0.8 A |
AT-WR4541G-50 - IEEE 802.11a/b/g/h, CPE with 11dBi 2.4GHz, RoHS, TDMA
The WR4500 family of dual band outdoor wireless base routers and routing CPEs allow the building of wireless only or hybrid IP networks that are scalable, reliable and fully controllable.
Wireless ISPs can easily and quickly provide homes in rural areas with broadband Internet access and VoIP telephony and, at the same time, can set-up WiFi hot spots for nomadic users. Enterprises can connect remote buildings without the need for expensive leased lines and can extend WiFi coverage to outdoor yards providing users with mobile intranet and Internet access everywhere. Municipalities can build wireless IP networks for connecting remote offices and for increasing public safety with real time monitored surveillance cameras and continuous
communication with local police patrols. Local utilities can easily control their remote equipments and read, in real time, gas, water and electricity meters without any need for expensive fiber cabling. Hot spot services can be provided to hotel guests and hospital patients ‘illuminating’ rooms from outside the building with a reduced impact on medical equipments because no
transmit radio will be installed inside the hospital. Both models can be used either as CPEs in Point to Multipoint links or as both ends of a Point to Point link. Flexibility is the primary advantage of
AT-WR4541wireless routing CPEs. Both models share the same firmware, radio module and enclosure.The only difference is in the embedded panel antenna:AT-WR4541a features a 15dBi 5GHz antenna whileAT-WR4541g is equipped wth an 11 dBi 2.4GHz antenna. Both models feature an additional type N coax connector for using any 2.4 or 5GHz external antennas.
