重量和尺寸
风扇尺寸(宽×深×高) |
120 x 25 x 120 mm |
风扇重量 |
160 g |
性能
气流 |
106 m³/h |
转速(最小) |
500 RPM |
转速(最大) |
1500 RPM |
类型 |
Cooler |
适用于 |
Processor |
处理器插座 |
Socket AM3, Socket AM3+, Socket AM2+, Socket FM2, Socket AM2, Socket FM1 |
CPU coller, 138 x 100 x 158 mm, 6 x 6 mm Heatpipes, 12 V, 500 - 1500 rpm, black
lpenföhn enters again the next level and presents the „Matterhorn Rev.C Black Edition".
Highest manufacturing quality, a snow white finish as well as multiple features make this cooler the best solution for any application.
The ideal performance of the Black Edition is ensured by using the new 120mm WingBoost2 premium fan that come with the cooler. With the new aerodynamically revised s-shaped wing geometry and the new WingBoost´s we both could increase the airflow as well as improve the static pressure at lower noise.
The included ultra-high-performance thermal grease Permafrost makes this deal perfect and guarantees the best possible cooling for CPUs in socket 2011, 2011-v3, 1366, 115x (Skylake compatible), 775, AM3(+), AM3, AM2(+), AM2, FM1 and FM2.
Trapezoid shaped fins
The special trapezoid shaped fins that are placed in a 180° rythm creating two essential advantages:
- Narrow Fin pitch in the center of the heatsink
This feature increases the thermal surface and ensures a higher heat dissipation
- Wide fin pitch at air inlet area
By having a wide fin pitch at the air inlet area the Alpenföhn „Matterhorn" can be run with very low fan speed as the airflow faces less resistance. Despite that the "Matterhorn" cooler has closed sides. This helps guiding the air through the narrow fin area and offers better mechanical stability