能量控制
最大电流 |
30 A |
接受频率 |
50/60 Hz |
最大总电流消耗每相位 |
24 A |
负载能力 |
5760 VA |
名义输出电压 |
120-208 V |
电源保护功能 |
Overload |
额定输入电压 |
120-208 V |
环境条件
非运行高度 |
0 - 15000 m |
工作高度 |
0 - 3000 m |
120/208V, 50/60Hz, 3.05m, 5760VA, 2A, 55x46x1829mm, 8.14kg, Black
Rack PDU 2G, Switched, ZeroU, 30A, 100-120/200-240V 2Ph, (16) 5-20R (7) C13 (1) C19
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Includes : Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cable