端口 & 界面
串口数量 |
1 |
电源插头 |
NEMA L6-20P |
交流电(AC)插座数量 |
3 AC outlet(s) |
性能
波形 |
Sine |
噪音水平 |
55 dB |
发声警报器 |
Y |
UPS 拓扑 |
Double-conversion (Online) |
能量控制
输入工作电压(最大值) |
275 V |
输入工作电压(最小值) |
100 V |
效率 |
91% |
电源输入频率 |
50/60 Hz |
能量波动功率 |
340 J |
输出功率(瓦特-安培) |
3000 VA |
波峰因数 |
3:1 |
输出工作电压(最小值) |
208 V |
输出工作电压(最大值) |
240 V |
输出功率 |
2700 W |
电池
电池充电时间 |
3 h |
电池电压 |
96 V |
半载典型备用时间 |
8.3 min |
全载典型备用时间 |
2.3 min |
电池更换报警 |
Audible |
支持的的电池数量 |
1 |
3000VA, 2700W, 208V, 50/60Hz, LCD, IP20, 31.3kg, Black
APC Smart-UPS SRT 3000VA 208V\n\nHigh density, double-conversion on-line power protection with scalable runtime\n\nIncludes : CD with software , Documentation CD , Installation guide , Removable support feet , USB cable , Warranty card\n\nBattery failure notification\nProvides early-warning fault analysis on batteries enabling timely preventive maintenance\nECO Mode\nOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection\nGreen mode\nPatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.\nLCD graphics display\nText and mimic diagrams that display modes of operation, system parameters and alarms.\nRack/Tower convertible\nProtects the initial investment in the UPS when migrating from tower to rack-mount environment.\n\nSmart-UPS On-Line Features & Benefits\n\nAvailability\nHot-swappable batteries\nEnsures clean, uninterrupted power to protected equipment while batteries are being replaced\nAutomatic restart of loads after UPS shutdown\nAutomatically starts up the connected equipment upon the return of utility power.\nTemperature-compensated battery charging\nProlongs battery life by regulating the charge voltage according to battery temperature.\nIntelligent battery management\nMaximizes battery performance, life, and reliability through intelligent, precision charging.\nAutomatic internal bypass\nSupplies utility power to the connected loads in the event of a UPS power overload or fault.\nScalable runtime\nAllows additional run time to be quickly added as needed.\n\nManageability\nNetwork manageable\nProvides remote power management of the UPS over the network.\nInfraStruXure Manager Compatible\nEnables centralized management via the APC InfraStruXure Manager.\nSmartSlot\nCustomize UPS capabilities with management cards.\nLED status indicators\nQuickly understand unit and power status with visual indicators.\nSerial connectivity\nProvides management of the UPS via a serial port.\n\nProtection\nGenerator compatible\nEnsures clean, uninterrupted power to protected equipment when generator power is used.\nSafety-agency approved\nEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.\nResettable circuit breaker\nEasy recovery from overloads; no need to replace a fuse.\nPower conditioning\nProtects connected loads from surges, spikes, lightning, and other power disturbances.\nCold-start capable\nProvides temporary battery power when the utility power is out.\nInput power factor correction\nMinimizes installation costs by enabling the use of smaller generators and cabling.\nFrequency and voltage regulation\nGives higher application availability by correcting poor frequency and voltage conditions without using the battery.\n\nMarketing Features\nSave time with easy and convenient remote accessibility.\nNetwork manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.\nLow operating and maintenance costs with proven reliability and intelligent battery management.\nIntelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.\nAvoids costly power problems by keeping your IT equipment and data protected and available.\nNetwork grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.\nPeace of mind that comes with full equipment compatibility and reliability of a leader\nProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.\n\nAdaptability\nPlug-and-Play external batteries\nEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.\nRack/Tower convertible\nProtects the initial investment in the UPS when migrating from tower to rack-mount environment.\nFlash upgradeable firmware\nInstall maintenance releases of firmware remotely using FTP.\n\nServiceability\nPredicitive failure notification\nProvides early-warning fault analysis ensuring proactive component replacement.\nDisconnected battery notification\nWarns when a battery is not available to provide backup power.\nUser-replaceable batteries\nIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)\nAutomatic self-test\nPeriodic battery self-test ensures early detection of a battery that needs to be replaced.\nAudible alarms\nProvides notification of changing utility power and UPS power conditions