性能
脉冲宽度调制 (PWM) 支持 |
Y |
Fins material |
Aluminium |
制冷瓦量(最大) |
200 W |
转速(最小) |
400 RPM |
转速(最大) |
1500 RPM |
蛙鞋的数量 |
43 |
类型 |
Cooler |
风扇数量 |
1 fan(s) |
风扇直径 |
120 mm |
处理器插座 |
Not supported |
散热管数量 |
5 |
散热管直径 |
6 mm |
适用于 |
Video card |
能量控制
电压 |
12 V |
电源 |
2.4 W |
额定电流 |
0.2 A |
Accelero Mono PLUS, Ø 120 mm, 400 - 1500 RPM, 0.4 Sone, 348 g
The Accelero Mono PLUS is equipped with a universal mounting mechanism, offers full support to a broad range of graphic cards. A 120 mm PWM fan and five heatpipes provide an ultimate cooling performance and a virtually silent environment at all times.
Superior Cooling Performance
The Accelero Mono PLUS operates at a maximum cooling capacity of 200 Watts. It is equipped with a 120 mm PWM fan and five heatpipes that dissipate a large amount of heat instantly. It ensures that the VGA graphic card can run under optimal temperature for an extended service life.
Enhanced RAM and VR Cooling
To achieve ultimate cooling efficiency, the Accelero Mono PLUS comes with an electrically non-conductive thermal glue G-1 to apply on the RAM and the VR heatsink. Compared to traditional thermal tapes and pads, the G-1 provides a far better thermal conductivity and can be removed without leaving any residues behind.
Virtually Silent
Operated by a low noise impeller enclosed in a patented fan holder to reduce the buzzing sound when the fan is spinning, the Accelero Mono PLUS is barely audible even running at full load. To enable minimum noise level at all circumstances, the PWM controller enables the fan to run at the optimal speed according to the load generated by the GPU.
Multi-Compatible
The Accelero Mono PLUS comes with a versatile mounting mechanism and extensive RAM and VR cooling to better suit different graphic cards.