音频
RMS每声道输出功率(8 Ohm) |
400 W |
声道串扰 (1kHz) |
70 dB |
RMS每声道输出功率(4 Ohm) |
600 W |
阻尼系数 |
400 |
频率范围 |
20 - 20000 Hz |
输入阻抗 |
20000 Ω |
输入灵敏度 |
775 mV |
总谐波失真 |
0.05% |
能量控制
电源保护功能 |
Short circuit, Overload, Overheating |
Triple channel power amplifier, 2x600 W + 1200 W, 20 Hz - 20 kHz, 93 dB, THD 0.05%
The T4 is a professional power amplifier which can deliver a power up to 2 x 600 Watt @ 4 Ohm + 1200 Watt (sub) @ 8 Ohm only, and is suitable for most common low impedance high power sound systems. The T series are designed as no-nonsense amplifiers with only the necessary controls and connectors. This creates great simplicity in use and installation. They are built as 2 channel amplifiers with an additional channel to power a passive subwoofer cabinet. Each input is fitted with a knob to set the cross-over frequency, with a range between 50Hz and 250Hz, to determine the signal for the subwoofer channel. They also contain a built-in limiter and a multipurpose protection circuit. The protection circuit detects DC malfunction, short circuit, overheating, overload and limits the signal when necessary. On the front of the amplifier, the volume of each channel can be set by an individual volume control, along with the signal, clip and protection indicator LED’s. Each channel is fitted with a balanced XLR input connector and a speakon output connector. The steel 19" housing has a height of 2 HE.