光纤
| 光纤类型 |
Multi-mode |
| 传输距离（最大） |
2 km |
| 以太网光缆技术 |
100BASE-FX |
| 光纤连接器 |
ST |
联网
| 自动 MDI / MDI - X 检测功能 |
Y |
| 网络标准 |
IEEE 802.3, IEEE 802.3af |
| 流量控制支持 |
Y |
| 可支持的电缆类型 |
Cat3, Cat5 |
| 全双工传输 |
Y |
| 10G支持 |
N |
能量控制
| 输入电压 |
46 - 49 V |
| 输入电流 |
1.6 A |
端口 & 界面
| 基本交换 RJ-45 以太网端口数量 |
4 |
| 光纤通道端口 |
1 |
| 基本交换 RJ-45 以太网端口类型 |
Fast Ethernet (10/100) |
| 以太网铜缆技术 |
100BASE-TX, 10GBASE-T, 10BASE-T |
环境条件
| 运行湿度范围(H-H) |
10 - 95% |
| 储存温度范围 (T-T) |
-40 - 85 °C |
| 工作高度 |
0 - 3000 m |
性能
| 平均故障间隔时间 |
2000000 h |
| 即插即用 |
Y |
| Auto-negotiation 自动协商功能 |
Y |
重量和尺寸
| 深度 |
90 mm |
| 重量 |
300 g |
| 宽度 |
38 mm |
| 高度 |
97 mm |
设计
| DIN导轨安装 |
Y |
| 液晶显示器指示灯 |
Y |
| 认证 |
FCC Title 47 Part 15 Class A\nICES-003- Class A\nCE: EN61000-6-2,4; EN61000-4-2,3,4,5,6\nEN55011\nUL Listed (US and Canada) per ANSI/ISA-12.12.01-2000,\nClass I, Div 2, Groups A,B,C,D,T4A;\nABS Type Approval for Shipboard Applications\nDNV Type Approval Certifi cation\nEN50155 for Railway Applications\nGOST-R Certified; RoHS Compliant |
以太网电源（PoE）
| 通过以太网（PoE）供电端口数量 |
4 |
| 支持以太网（PoE） |
Y |
另外
| 产品色彩 |
Black |
| 运行温度范围（T - T） |
-40 - 85 °C |
Fast Ethernet, 4xRJ-45, 1xST, Multi-mode, 2km, 1310nm, 46-49V, 38x90x97mm, 300g, Blue
105FX-POE
The N-TRON 105FX-POE Unmanaged Industrial Ethernet Switch is designed to transmit power along with data over an Ethernet network. It is ideal for PoE capable devices where running an AC power feed is either not possible or cost effective. This allows an end user to power a PoE camera, wireless access point, or any other PoE capable device without the need for running separate wires for power. This also makes it possible to utilize a centralized battery backup for all these devices.
PRODUCT OVERVIEW
The 105FX-POE Industrial Network Switch is designed to meet the most demanding industrial communications requirements by providing high throughput and minimum downtime while also providing power to PoE capable devices over the Ethernet network. The 105FX-POE provides four RJ-45 auto sensing10/100BaseTX ports. All ports are full/half duplex capable, using "state of the art" Ethernet switching technology. All four RJ-45 ports also act as PoE ports allowing power to pass through four of the eight strands of CAT5 cable. Each PoE port supports up to 15.4 watts of power. The 5th port is a 100BaseFX fi ber optic uplink utilizing industry standard ST or SC duplex connectors. The 105FX-POE auto-negotiates the speed and fl ow control capabilities of the four TX port connections, and confi gures itself automatically. The N-TRON 105FX-POE also supports up to 2,000 MAC addresses, enabling these products to support extremely sophisticated and complex network architectures. The 105FX-POE automatically detects any PoE device that is connected and powers it accordingly. If a PoE fault is detected on a specific port the Auto-disconnect feature disables PoE power on that port, allowing only data communications to pass, reducing the risk of damaging costly equipment. The 105FX-POE is an ideal candidate for providing data and power to wireless LAN access points, network cameras, VoIP, and other PoE capable devices. The product also helps reduce costs by eliminating the need for electrical wiring and electrician expenses. The 105FX-POE has extended operating environmental specifications to meet the harsh needs of the industrial environment. For cost savings and convenience the network switch can be DIN-Rail mounted alongside Ethernet I/O or other Industrial Equipment. To increase reliability the 105FX-POE provides dual redundant power inputs. Two power LED's are also provided on this unit indicating a valid power source on both the redundant power inputs and also indicating when a power fault bus occurs.
