设计
外壳材料 |
Metal |
液晶显示器指示灯 |
Y |
內置式 |
N |
联网
自动 MDI / MDI - X 检测功能 |
Y |
以太网的数据传输率 |
10, 100, 1000 Mbit/s |
以太网接口类型 |
Gigabit Ethernet |
网络标准 |
IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z |
转换器输入接口 |
1000Base-T, 100Base-TX, 10Base-T |
转换器输出接口 |
1000Base-LX |
能量控制
输入电压 |
100-240 V |
接受频率 |
50/60 Hz |
输入电流 |
0.5/0.25 A |
环境条件
运行湿度范围(H-H) |
5 - 95% |
储存温度范围 (T-T) |
-25 - 70 °C |
重量和尺寸
深度 |
143 mm |
宽度 |
42 mm |
重量 |
60 g |
高度 |
227 mm |
另外
数据传输率(最大) |
1000 Mbit/s |
连接方式 |
Wired |
以太网路(RJ-45)连接接口数量 |
4 |
运行温度范围(T - T) |
0 - 50 °C |
10/100/1000 Mbps Managed Multi-port Optical Demarcation Device, LX-SM1550 - PLUS-SC, 80 km, 4- RJ45
- 802.1Q VLAN-tags on per-port basis, based on DiffServ or PRI values
- SNMP Manageable
- QoS - 802.1p-based packet prioritization
- Per-port bi-directional Bandwidth control
- VLAN-tagging and Q-in-Q (double-tagging) segregates customer traffic
- Up and running in less then five minutes
The Giga-AccessEtherLinX-II enables service providers to offer differentiated “Transparent LAN” services to multi-tenant building and business customers without the need for costly remote routers. Residing at the customer premises, the Giga-AccessEtherLinX-II provides a VLAN-based, Layer 2 entry point to the last mile fiber network to support trunking, differentiating and separating customer traffic. Featuring SNMP management with per-port 802.1Q VLAN, 802.1p QoS, traffic prioritization, bandwidth control and multicast pruning/snooping (using IGMP v1, v2), the Giga-AccessEtherLinX-II is perfect for a wide range of Fiber-to-the-Home, Fiber-to-the-Curb and Fiber-to-the-Business (FTTx) services, and is an ideal solution for delivering Ethernet-based services to customers quickly and cost effectively. Designed with a small footprint, the Giga-AccessEtherLinXII facilitates easy installation inside the premises. It features four 10/100/1000 twisted pair Ethernet downlink ports (for connecting users/LANs), with either a 1000Base-FX fiber or SFP uplink port, and is powered from an internal AC or DC power supply.
The Giga-AccessEtherLinX-II accepts traffic containing VLAN tags on the Uplink port and directs that traffic to the twisted pair downlink ports based on the VLAN ID. In addition to assigning 802.1Q VLAN-tags on a per-port basis, users can also “Qualify” the different VLAN TAGS to assign based on the DiffServ or PRI value of the incoming frame. Traffic priority for each port is supported with a hi/low prioritization queues. The Giga-AccessEtherLinX-II includes per port bi-directional bandwidth control, and supports IGMP multicast pruning which ensures only the necessary amount of IP multicast packets are bridged.