联网
| 布线技术 |
10/100Base-T(X) |
| 网络标准 |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
性能
| 自动MDIX IEEE |
Y |
| 全双工传输 |
Y |
| 平均故障间隔时间 |
57.515 h |
| 可支持的电缆类型 |
Cat5 |
| 最大传输距离 |
100 m |
能量控制
| 功耗（一般操作） |
5.76 W |
| 外接电源转接器 |
Y |
| 交流电（AC）输入电压 |
12 V |
其他功能
| 运行温度范围（T - T） |
14 - 140 °F |
环境条件
| 运行湿度范围(H-H) |
5 - 95% |
| 储存温度范围 (T-T) |
-20 - 70 °C |
重量和尺寸
| 深度 |
109.2 mm |
| 重量 |
150 g |
| 宽度 |
803 mm |
| 高度 |
238 mm |
另外
| 产品色彩 |
Blue |
| 以太网路(RJ-45)连接接口数量 |
1 |
| 运行温度范围（T - T） |
-10 - 60 °C |
ethernet coaxial extender, 10/100 Base-T, 10/100Mbps, RJ-45, BNC Coaxial
The model EIS-EXTEND-C allows your existing coaxial cable to be used to extend Ethernet connections up to 8530 feet (2,600 M).
Two EIS-EXTEND-C models are required for the Ethernet extension, (one at each end of your extension points). This product can be used with included power supply or in a 19 inch rack mount chassis, which can house up to 16 EIS-EXTEND-C units or EIS Media Converters.
One 10/100Base TX (TX) Ethernet port with RJ-45 connector
- Auto negotiation of speed and duplex mode on TX port
- Auto MDI/MDIX on Ethernet port
- IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX compliant
- Line port uses BNC connector or F-Type connector
- Line port link is full-duplex up to 85Mbps over existing coaxial cable
- One DIP switch for configuring local or remote mode
- Status LED’s for monitoring and connection status
- External AC to DC power adapter included
- Used as a stand-alone device or with a 19 inch rack chassis
- Hot-swappable when used in 19 inch rack chassis
