数据传输
| 存储转发 |
Y |
| MAC 地址表 |
8000 entries |
联网
| 网络标准 |
IEEE 802.1p, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.3z |
| IGMP侦听 |
Y |
| 自动 MDI / MDI - X 检测功能 |
Y |
| 示踪 VLAN |
Y |
| 全双工传输 |
Y |
| 基于端口的 VLAN |
Y |
| 流量控制支持 |
Y |
| 动态主机配置协议服务器 |
Y |
| 10G支持 |
N |
重量和尺寸
| 深度 |
131 mm |
| 宽度 |
70.4 mm |
| 高度 |
149.1 mm |
设计
| 外壳材料 |
Metal |
| DIN导轨安装 |
Y |
| 液晶显示器指示灯 |
Y |
| 国际保护（IP）代码 |
IP30 |
| 认证 |
CE, FCC, RoHS, NEMA TS2, EN61000-6-1 |
| 墙壁支架 |
Y |
能量控制
| 输入电压 |
10 - 24 V |
| 功耗（一般操作） |
20 W |
管理功能
| 系统事件日志 |
Y |
| 网上管理 |
Y |
| 开关类型 |
Managed |
端口 & 界面
| 基本交换 RJ-45 以太网端口数量 |
16 |
| 接线端子台端口 |
Y |
| 基本交换 RJ-45 以太网端口类型 |
Fast Ethernet (10/100) |
性能
| 程序包缓冲区内存 |
0.256 MB |
| 平均故障间隔时间 |
200000 h |
安全
| 支持安全算法 |
HTTPS, SNMP, SNMPv3 |
环境条件
| 运行湿度范围(H-H) |
0 - 95% |
| 储存温度范围 (T-T) |
-40 - 80 °C |
另外
| 产品色彩 |
Blue |
| 运行温度范围（T - T） |
-10 - 60 °C |
Fast Ethernet, 16xRJ-45, 8K MAC, 18-36V, 20W, IP30, Metal, 70.4x131x149.1mm, Blue
REDUNDANT, ULTRA-FAST RECOVERY, EASY CONFIGURATION
B&B Electronics Elinx ESW500 series Industrial managed Ethernet switches provide powerful functionality in an IP30 DIN-rail or panel mount package. The switches are designed for industrial applications and engineered with managed features such as IGMP Snooping, Port Based VLAN, 802.1Q Tag VLAN, STP, RSTP, Web Based Management, Ingress Packet Filtering, and Egress Rate Control.
RingOn Technology
Two ports can be used for network redundancy by implementing RingOn technology providing a rapid recovery system for industrial networks. If any part of the ring disconnects the network communications will automatically be restored.
Web-based Management
Each switch has an embedded HTML web site residing in flash memory, offering advanced management features allowing users to manage the switch from anywhere on the network via a standard web browser.
VLAN Configuration
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. This allows you to isolate network traffic so that members of a VLAN will only receive traffic from other members of the same VLAN. Creating a VLAN from a switch is the logical equivalent of reconnecting a group of network devices to another Layer 2 switch. However, since it is a virtual network, the network devices remain connected to the same switch physically. Both port-based and 802.1Q (tagged-based) VLAN are supported.
