技术细节
| 接收器灵敏度 |
-32 dB |
| 输出接口 |
Fiber (SC) |
| 波特率 |
115.2 Kbit/s |
| 隔离度 |
2 kV |
| 传输距离（多模式） |
2 km |
| RS-485信号 |
Data+, Data- |
| 主机接口 |
RS-232/422/485 |
| 组装 |
DIN-rail |
| RS-232信号 |
GND |
| 波长 |
1310 nm |
环境条件
| 运行湿度范围(H-H) |
0 - 95% |
| 储存温度范围 (T-T) |
-40 - 85 °C |
重量和尺寸
| 深度 |
92.9 mm |
| 重量 |
208.65 g |
| 宽度 |
132.4 mm |
| 高度 |
30 mm |
认证标准
| 认证 |
FCC, CE, IEC 61850-3, IEEE 1613, UL C1 D2, NEMA TS2 |
另外
| 产品色彩 |
Blue |
| 运行温度范围（T - T） |
-40 - 85 °C |
RS 232/422/485 to SC, 1310nm, 10-48V, 115.2Kbit/s, 132.4x92.9x30mm, 208.65g, Blue
FOSTCDRI-PH-MC
The FOSTCDRI-PH-xx series are premium heavy industrial serial to fiber optic converters. Designed for rugged industrial environments, they have been put through most exacting compliance testing in the industry. Meeting IEC 61850-3 and IEEE 1613 requirements, they are suitable for installation in electrical substations. These specifications are more stringent than NEMA TS1/TS2 requirements for transportation applications. Powerful isolation protects equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection. Packaged in a rugged IP30 metal case, these units convert serial signals to multi-mode or single-mode fiber optic. Bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch. In addition to direct point-to-point connectivity, operation in multi-drop mode is possible enableing serial devices to communicate with up to 31 others in a fiber ring. Supporting mixed standards, you can replace other converters and add EMI/RFI protection inherent to fiber optic communications.
