技术细节
| 接收器灵敏度 |
-32 dB |
| 输出接口 |
Fiber (SC) |
| 波特率 |
115.2 Kbit/s |
| 隔离度 |
2 kV |
| 传输距离（单模式） |
15 km |
| RS-485信号 |
Data+, Data-, GND |
| 主机接口 |
RS-232/422/485 |
| 组装 |
DIN-rail |
| RS-232信号 |
GND |
| 波长 |
1310 nm |
环境条件
| 运行湿度范围(H-H) |
0 - 95% |
| 储存温度范围 (T-T) |
-40 - 85 °C |
重量和尺寸
| 深度 |
97 mm |
| 重量 |
149.7 g |
| 宽度 |
128 mm |
| 高度 |
28 mm |
认证标准
| 认证 |
UL 508, File Number: E222870, FCC Part 15, CISPR, EN 55022: 2010 + AC:2011, CE, EN 61000-6-1: 2007, EN 61000-4-2: 2009, EN 61000-4-3: 2006, EN 61000-4-4: 2012, EN 61000-4-6: 2009 |
另外
| 产品色彩 |
Blue |
| 运行温度范围（T - T） |
-40 - 80 °C |
RS 232/422/485 to SC, 1310nm, 10-48V, 115.2Kbit/s, 128x97x28mm, 149.7g, Blue
FOSTCDRI-SC
B&B Electronics’ ILinx fiber converters designed with functionality required for heavier industrial environments. Model FOSTCDRi-Sx industrial-grade isolated converter changes RS-232, RS-422, or RS-485 to single-mode fiber optics. Designed for industry, FOSTCDRi-Sx extends serial data ranges up to 15 km (9 mi) and provides the most versatile connection possible between asynchronous full or half-duplex serial equipment. In addition to direct point-to-point connectivity, it is capable operating in a multi-drop mode. This allows one serial device to communicate with up to 31 others around a fiber optic ring. Since it supports mixed serial standards, it can replace other converters and isolators and add the EMI/RFI immunity inherent to fiber optic communications. Fiber optic connectors are SC or ST. B&B Electronics’ Automatic Send Data Control circuit controls the RS- 422/485 driver chip, eliminating the requirement for special software. Easy to install and configure, it has a 12-position DIP switch to set up the RS-422/485 parameters and removable terminal blocks to connect serial signals and power. In RS-232 mode, the FOSTCDRI-SC supports Transmit Data and Receive Data. Handshaking signals are not passed through.
