重量和尺寸
| 深度 |
152 mm |
| 重量 |
1300 g |
| 宽度 |
74 mm |
| 高度 |
105 mm |
数据传输
| MAC 地址表 |
8000 entries |
| 交换容量 |
5.6 Gbit/s |
| 巨型帧 (Jumbo frames) |
9210 |
| VLAN 数量 |
256 |
| 队列数量 |
8 |
端口 & 界面
| 继电器输出 |
1 |
| 控制台端口 |
RS-232 |
| 基本交换 RJ-45 以太网端口数量 |
8 |
| 接线端子台端口 |
Y |
| 以太网铜缆技术 |
100BASE-TX, 1000BASE-TX, 10BASE-T |
| 基本交换 RJ-45 以太网端口类型 |
Fast Ethernet (10/100) |
| Combo SFP 端口数量 |
2 |
性能
| 缓冲区大小 |
4100 KB |
| 程序包缓冲区内存 |
4.1 MB |
| 平均故障间隔时间 |
858835 h |
| Auto-negotiation 自动协商功能 |
Y |
管理功能
| 支持管理信息基本原则 |
Standard MIB, Private MIB |
| 支持服务质量（QoS） |
Y |
| 重启按钮 |
Y |
| 网上管理 |
Y |
| 开关类型 |
Managed |
联网
| 端口镜像 |
Y |
| VLAN支持 |
Y |
| IGMP侦听 |
Y |
| 自动 MDI / MDI - X 检测功能 |
Y |
| 速率限制 |
Y |
| 链路汇集 |
Y |
| 网络标准 |
IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| 基于端口的 VLAN |
Y |
| 流量控制支持 |
Y |
| 自动检测 |
Y |
| 10G支持 |
N |
| 全双工传输 |
Y |
设计
| 外壳材料 |
Metal |
| DIN导轨安装 |
Y |
| 液晶显示器指示灯 |
Y |
| 国际保护（IP）代码 |
IP30 |
| 认证 |
UL508, NEMA TS2, EN50121-4, FCC Part 15 Subpart B Class A, EN 55011/55022, Class A, EN 61000-4-2 (Level 3), EN 61000-4-3 (Level 3), EN 61000-4-4 (Level 3), EN 61000-4-5 (Level 3), EN 61000-4-6 (Level 3), EN 61000-4-8 (Level 3), IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6 |
| 墙壁支架 |
Y |
能量控制
| 输入电压 |
16.8 - 57.6 V |
| 功耗（一般操作） |
12.1 W |
| 冗余电源(rps)支持 |
Y |
| 功耗（最大） |
132 W |
以太网电源（PoE）
| 以太网（PoE）电源端口电源 |
30 W |
| 以太网（PoE）供电总功率概算 |
120 W |
| 以太网供电（PoE+）端口数量 |
8 |
| 电源保护功能 |
Over current, Reverse polarity |
| 支持以太网（PoE） |
Y |
安全
| SSH / SSL支持 |
Y |
| 支持安全算法 |
HTTPS, PEAP, SSH, SSL/TLS, TTLS |
环境条件
| 运行湿度范围(H-H) |
10 - 95% |
| 储存温度范围 (T-T) |
-40 - 85 °C |
| 储存相对湿度范围（H - H） |
10 - 95% |
另外
| 产品色彩 |
Blue |
| 巨型帧 |
Y |
| 运行温度范围（T - T） |
-40 - 75 °C |
Managed, MIB, 8xRJ-45, 2xSFP Combo, RS-232, 8000 MAC, 5.6Gbit/s, 256 VLANs, 8 Queues, 9216 Jumbo Frames, 12-48V, 12.1W, 74x152x105mm, 1.3kg, Blue
FULLY MANAGED WITH INDUSTRIAL, RUGGEDIZED FEATURES DESIGNED TO WORK IN HARSH ENVIRONMENTS
- Get all the features you are already looking for in a managed switch such as support for Telnet, IIpv4/IPv6, SNMP v1, V2c and v3, VLAN, IGMP snooping and more.
- Avoid paying for extra NMS software for multiple switch deployment through our embedded IXM software that can auto-synchronize firmware updates and push settings for single or groups of switches.
- Get a simple, easy-to-navigate web GUI for managing the full suite of diagnostic, monitoring and network performance capabilities
- Reduce your redundant network cabling and planning costs through self-healing X-Ring recovery technology that allows different ring healing methods to coexist in one switch
- Protect your investment against unforeseeable congestion and performance issues with our Gigabit bandwidth option
Get all the features you are already looking for in a managed switch
SE500 Series includes the features you are already looking for in a managed switch such as VLAN, IGMP Snooping, Network Redundancy, Link Aggregation, SNMP V1,V2c,V3, Web and Telnet support. Smart PoE Management features allow advanced PoE settings and monitoring. Also included are comprehensive network security features such as SSH, HTTPS/SSL, TLS, TTLS, PEAP and Radius are also offered.
Avoid paying for extra NMS software for multiple switch deployment
Embedded into each switch is the industry leading eWorx’s IXM(TM) cross management technology. IXM(TM) allows the installer to auto synchronize firmware updates and push configuration settings to either individual or groups of switches. IXM(TM), provides maintenance and provisioning functionality to both the SE500 and SE300 family switches without the need of extra software or trained personal. IXM(TM) speeds up switch deployment and ensures network stability.
Get a simple, easy-to-navigate web GUI
With all SE500 series switches, you’ll get a simple, easy-to-use web GUI to manage a powerful suite of diagnostic, monitoring and network performance capabilities, including but not limited to cable diagnostics, IPv4/IPv6 ping, Fiber SFP monitoring (DDMI), System log, port utilization, traffic statistics, QoS, rate limiting and more.
Reduce your redundant network cabling and planning costs through X-Ring technology
Our sub-20ms self-healing X-Ring rapid auto recovery technology allows different ring healing methods to coexist in one switch and supports different topology options, providing you a substantial improvement over Spanning Tree and Rapid Spanning Tree.
Protect your investment against unforeseeable congestion and performance issues
The SE500 series offers a full gigabit option, allowing speeds up to 10 times greater than the previous generation, resulting in less congestion and better overall performance for the entire network.
Get equipment certified to work in harsh environment applications
Our switches are made with dual wide-range power input design (84.V to 62.4 VDC), self-healing network resiliency (less than 10(ms) @ 250 units), wide temperature tolerance (-40 to 75°C), MTBF (Mean time between failures) over 50 years, High Electrical Magnetic (EMC) resistance, Level 4 design, *IEEE 1613 Class 2 Complaint*
Reduce total cost of ownership by cutting power usage by up to 60%
As Ethernet Green, IEEE802.3az Energy-Efficient Ethernet switches, SE500 series switches eWorx Switches cut power usage by up to 60%, reducing total cost of ownership.
