数据传输
| MAC 地址表 |
8000 entries |
| 交换容量 |
20 Gbit/s |
| 巨型帧 (Jumbo frames) |
9216 |
| VLAN 数量 |
256 |
| 队列数量 |
8 |
端口 & 界面
| 继电器输出 |
1 |
| 基本交换 RJ-45 以太网端口数量 |
8 |
| 快速以太网（铜缆）端口数量 |
8 |
| 接线端子台端口 |
Y |
| 基本交换 RJ-45 以太网端口类型 |
Fast Ethernet (10/100) |
| 以太网铜缆技术 |
100BASE-TX, 1000BASE-TX, 10BASE-T |
| 千兆以太网(铜)端口数量 |
2 |
| Combo SFP 端口数量 |
2 |
管理功能
| 支持管理信息基本原则 |
Standard MIB, Private MIB |
| 支持服务质量（QoS） |
Y |
| 网上管理 |
Y |
| 开关类型 |
Managed |
联网
| VLAN支持 |
Y |
| IGMP侦听 |
Y |
| 速率限制 |
Y |
| 链路汇集 |
Y |
| 网络标准 |
IEEE 802.1Q, IEEE 802.1p, IEEE 802.3az |
| 流量控制支持 |
Y |
| 自动检测 |
Y |
| 10G支持 |
N |
| 全双工传输 |
Y |
设计
| 外壳材料 |
Metal |
| DIN导轨安装 |
Y |
| 液晶显示器指示灯 |
Y |
| 国际保护（IP）代码 |
IP30 |
| 认证 |
UL508, NEMA TS2, EN50121-4, FCC Part 15 Subpart B Class A, EN 55011/55022, Class A, EN 61000-4-2 (Level 3), EN 61000-4-3 (Level 3), EN 61000-4-4 (Level 3), EN 61000-4-5 (Level 3),EN 61000-4-6 (Level 3), EN 61000-4-8 (Level 3), IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6 |
| 墙壁支架 |
Y |
能量控制
| 输入电压 |
8.4 - 57.6 V |
| 功耗（一般操作） |
12.1 W |
| 冗余电源(rps)支持 |
Y |
性能
| 程序包缓冲区内存 |
4.1 MB |
| 平均故障间隔时间 |
858835 h |
| 固件可升级 |
Y |
| Auto-negotiation 自动协商功能 |
Y |
环境条件
| 运行湿度范围(H-H) |
10 - 95% |
| 储存温度范围 (T-T) |
-40 - 85 °C |
| 储存相对湿度范围（H - H） |
10 - 95% |
安全
| 环路保护 |
Y |
| 支持安全算法 |
802.1x RADIUS, HTTPS, PEAP, SNMPv3, SSH, SSL/TLS, TTLS |
协议
| 管理协议 |
WebAccess NMS, LLDP, SNMP v1/v2c/v3, Traps, SMTP, RMON, SNTP |
重量和尺寸
| 深度 |
152 mm |
| 重量 |
1300 g |
| 宽度 |
74 mm |
| 高度 |
105 mm |
以太网电源（PoE）
| 电源保护功能 |
Over current, Reverse polarity |
另外
| 产品色彩 |
Blue |
| 巨型帧 |
Y |
| 运行温度范围（T - T） |
-40 - 75 °C |
Managed, 8xRJ-45, 2xCpmbo SFP, 8000 MAC, 20 Gbit/s, 9216 Jumbo Frames, 8.4 - 57.6V, 12.1W, 74x152x105mm, 1.3kg, Blue
Fully Managed Industrial Ethernet Switch All Gigabit, SNMP, Modbus/TCP
The SE500 series is a fully managed Ethernet switch with industrial, ruggedized features designed to work in harsh environment applications. This switch offers all the features expected in a managed switch such as VLAN, IGMP Snooping, Network Redundancy, Link Aggregation, SNMP V1,V2c,V3, Web and Telnet support. Comprehensive network security features such as SSH, HTTPS/SSL, TLS, TTLS, PEAP and Radius are also offered. Comprehensive network security features such as SSH, HTTPS/SSL, TLS, TTLS, PEAP and Radius are also offered. Embedded into each switch is the industry leading eWorx IXM™ cross management technology. IXM allows the installer to auto-synchronize firmware updates and push configuration settings to either individual or groups of switches. IXM provides maintenance and provisioning functionality to both the SE500 and SE300 family switches without the need of extra software or trained personal. IXM speeds up switch deployment and ensures network stability. The eWorx SE500 series switches feature a powerful suite of diagnostic, monitoring and network performance capabilities: Cable diagnostics, IPv4/ IPv6 ping, fiber SFP monitoring (DDMI), port utilization, traffic statistics, QoS and rate limiting - all available from the Web GUI. These advanced features offer quick and easy troubleshooting.
