端口 & 界面
DC-IN插口 |
Y |
广域网接口 |
Ethernet (RJ-45) |
性能
系统日志 |
Y |
网上管理 |
Y |
频段 |
2.4/5 GHz |
Wi-Fi 多媒体 (WMM)/(WME) |
Y |
5 GHz |
Y |
自动 MDI / MDI - X 检测功能 |
Y |
VLAN支持 |
Y |
以太网的数据传输率 |
1000, 10, 100 Mbit/s |
调制 |
OFDM, DSSS |
2.4 GHz |
Y |
协议
动态主机配置协议服务器 |
Y |
动态主机配置协议客户 |
Y |
管理协议 |
Telnet, SSH, HTTP, HTTPS, SNMP |
能量控制
支持以太网(PoE) |
Y |
输入电压 |
100 - 240 V |
天线
天线增益水平(最大值) |
6 dBi |
集成天线 |
Y |
天线数量 |
4 |
另外
数据传输率(最大) |
1000 Mbit/s |
以太网路(RJ-45)连接接口数量 |
2 |
W2003ac Business WLAN .11ac Access Point
- 802.11ac/agbn 2x2 Mimo technology with up to 867 Mbit/s
- Dual concurrent operation at 5GHz and 2,4 GHz
- Enhanced feature set for performance optimizing
- Managed operation or stand-alone operation
- 2 x Gigabit Ethernet with standard PoE (12,4W)
- Certified for operation in medical environments
- Inconspicuous housing design with swichtable LEDs
<b>Business WLAN .11ac Access Point</b>
Budget 802.11ac Access Point with full performance support of .11ac devices, interoperable to .11n devices
<b>Product Description</b>
The bintec W2003ac access point supports the new 802.11ac wireless standard. The dual radios allow for simultaneous operation in both the 2.4 GHz and 5 GHz frequency bands. bintec Client Management ensures that the wireless client is always able to operate at maximum speed. bintec Client Management offers a wide range of features and also ensures that the client is always connected to the access point that can provide the best performance.
MIMO 2x2 technology and the 802.11ac wireless standard allow for PHY data rates of up to 867 Mbps. The MIMO 2x2 technology with two transmission streams offers the considerable advantage of requiring less than 12.4 watts of power, enabling operation on a standard low-cost PoE infrastructure.
In addition, the MIMO 2x2 technology is an ideal match for current smartphones and tablet PCs, which frequently only support 802.11ac with MIMO 1x1. Access points with the expensive MIMO 3x3 or MIMO 4x4 technology are not able to realize their full performance potential with these types of terminal devices, which makes an access point operating on the 802.11 ac standard and MIMO 2x2 the better solution and the better value.
The bintec W2003ac has an unobtrusive housing with internal antennas and LEDs that turn off. The included wall and ceiling mounting bracket makes installation easy.
The access point be managed using the bintec Cloud NetManager or a locally installed bintec WLAN Controller. Using the included free WLAN Controller license, you can operate this model as a master-AP to manage a small wireless LAN with up to six access points. Of course you can also configure the W2003ac to run as a stand-alone AP. It's hard to imagine greater flexibility.