联网
自动 MDI / MDI - X 检测功能 |
Y |
以太网的数据传输率 |
10, 100, 1000 Mbit/s |
能量控制
输入电压 |
100-240 V |
接受频率 |
50/60 Hz |
支持以太网(PoE) |
Y |
另外
以太网路(RJ-45)连接接口数量 |
2 |
连接方式 |
Wired |
数据传输率(最大) |
1000 Mbit/s |
Gigabit PoE+ Media Converter, 10/100/1000BASE-T to SFP
<b>Quick Facts</b>
Features two 10-/100-/1000-Mbps copper ports and one SFP port that can be customized to the interface of your choice through the use of standard SFPs.
Both UTP ports are auto-sensing with auto MDI/MDI-X; one UTP port supports 802.11at PoE+.
Rugged metal chassis.
<b>Further Details</b>
Acts as power sourcing equipment (PSE) on the copper side to power PoE+ devices.
Features an extended temperature range when used with DC terminal-block power.
This tough media converter is the ideal way extend your network over fiber and also power a PoE device. Use it to link to faraway PoE devices such as IP security cameras, wireless access points, and VoIP phones.
The media converter features two autosensing 10/100/1000 UTP ports plus an SFP port that can be customized to virtually any interface—including multimode fiber, single-mode fiber, or Gigabit copper—through the use of a standard SFP. One UTP port supports 802.3at Power over Ethernet, enabling it to power a PoE+ PD device; the other is a straightforward Ethernet port, which can be used for network expansion.
The Gigabit PoE+ Media Converter can be powered three ways: from an AC power supply (LGC5210-PS, included), via the DC power jack, or via the DC terminal block. When used with DC power to the terminal block, the converter supports an extended operating temperature range of +32 to +158° F (0 to +70° C).
The converter requires only one power source to power both the converter and a PoE+ device; you can position the PoE+ device up to 100 meters (328 feet) away from the converter, enabling flexible placement of wireless APs and security cameras. A pair of input terminals and output terminals enables you to cascade DC power in a DIN rail installation (optional DIN Rail Clip (LXC-DR) is sold separately).