性能
| 波长 |
1300 nm |
| 最大传输距离 |
2000 m |
| 光纤模式结构 |
Multi-mode |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
1 |
| 连接方式 |
Wired |
10BASE-T/100BASE-TX/Multimode, 1300-nm, ST, 2 km
<b>Quick Facts</b>
- LinkLoss™ provides instant notification of fiber segment link problems.
- FiberAlert minimizes the problems associated with the loss of one strand of fiber cable.
<b>Further Details</b>
- Copper port features autocross so you never need a crossover cable.
- Autosensing module automatically adapts to network speed.
- Choose from 27 converter modules (with one of five chassis in 1-, 4-, 8-, or 12-slot combinations) for exactly the right configuration.
Convert 10- or 100-Mbps segments between twisted-pair and multimode fiber in half- or full-duplex mode. House the modules in your choice of five chassis (LE7401A-R2, LE7404A, LE7408A, LE7412A, LE7412A-DC). You can install any combination of modules in any chassis, giving you complete flexibility.
The FiberAlert feature minimizes the problems associated with the loss of one strand of fiber cable. If a strand goes out, the local site administrator is notified of a fault and can quickly determine where it is located.
The LinkLoss feature enables you to identify problems on the fiber segment from the twisted-pair side. You can also identify problems on the twisted-pair segment from the fiber side.
An internal two-position switch on the twisted-pair port eliminates the need for a crossover cable. Just move the switch to the appropriate setting on the module before installing the card.
Choose from fiber modules in the Modular Media Converter family that support 10-/100-Mbps Ethernet on the copper side and multimode or single-mode on the fiber side. Use these modules to add distance—up to 40 kilometers—to your network. Single-strand fiber modules send and receive over one single-mode fiber strand, so you save on infrastructure costs.
