性能
| 最大传输距离 |
2000 m |
| 光纤模式结构 |
Multi-mode |
| 波长 |
850 nm |
能量控制
| 接受频率 |
50/60 Hz |
| 输入电压 |
100-240 V |
联网
| 双机热备系统 |
Half, Full |
| 以太网的数据传输率 |
10, 100 Mbit/s |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
1 |
| 连接方式 |
Wired |
10/100BASE-TX to 100BASE-SX, 300 m, 850-nm Multimode, SC
<b>Quick Facts</b>
- 10-/100-Mbps autosensing on the copper port. That means you can convert either 10BASE-T or 100BASE-TX to fiber with the same unit!
- Compact size for space-effective installation in virtually any location.
- Universal 100-/240-VAC internal power supply. No need to mess with bulky AC/DC transformers.
<b>Further Details</b>
- Supports half- and full-duplex operation.
- Link-Fault Detection for easy troubleshooting.
- Front-panel LEDs monitor activity.
- Three modes of operation.
Connect 10-Mbps copper devices to your fiber-based cabling infrastructure, then upgrade to Fast Ethernet later.
The Black Box® 10-/100-Mbps Autosensing Media Converter enables you to implement a 10-Mbps fiber network and migrate to 100 Mbps with a single unit. It's ideal for futureproofing your fiber-to-desktop applications. When you upgrade a workstation to 100 Mbps, for example, all you have to do is change the network interface card. No other replacements are required.
This compact, 1U-high converter includes a 100-/240-VAC internal power supply and is available in multimode and single-mode versions with ST® or SC connectors. Choose multimode for shorter distances (up to 2 km [1.2 mi.]) and short-wave transmissions over 850-nm fiber in accordance with the 100BASE-FX standard.
Our 10-/100-Mbps Autosensing Media Converter includes a Link-Fault Detection feature, which makes it much easier to detect faults. If a fault occurs, front-panel LEDs help you to isolate cable breaks. The converter also has a push button by the twisted-pair port for selecting a crossover workstation connection or a passthrough repeater/hub/switch connection.
