能量控制
| 接受频率 |
50/60 Hz |
| 支持以太网（PoE） |
Y |
| 输入电压 |
100-240 V |
联网
| 自动 MDI / MDI - X 检测功能 |
Y |
| 双机热备系统 |
Half, Full |
| 以太网的数据传输率 |
10, 100 Mbit/s |
性能
| 最大传输距离 |
2000 m |
| 光纤模式结构 |
Multi-mode |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
1 |
| 连接方式 |
Wired |
10BASE-T/100BASE-TX to 100BASE-FX, Multimode, ST, 2 km
<b>Quick Facts</b>
- Get powered, and extend your network up to 2 kilometers (1.2 mi.) over fiber.
- Convert 10-/100-Mbps copper cabling to 100-Mbps fiber optic cabling.
- Undercurrent and overcurrent detection and load sensing.
<b>Further Details</b>
Constrained by the distance limits of PoE over copper? Incorporate fiber into your network!
This PoE PSE Media Converter not only enables you to connect copper cables to long-distance fiber data links, it also safely powers compatible devices plugged in on the copper side.
Fully compliant with the 802.3af Power over Ethernet (PoE) standard, the converter functions as power source equipment (PSE) to provide -48 VDC power via copper wiring to access points, cameras, and similar devices in areas without nearby power outlets.
For equipment protection, it offers overcurrent and undercurrent detection, as well as fault protection input and power monitoring. It also has powered device signature sensing to detect when a 802.3af compliant device is connected downstream.
Plus, link-fault passthrough and far-end fault detection features keep you from sending valuable data across invalid links.
