技术细节
| 支持板载图形适配器 DirectX 版本 |
RJ-45 |
Fluke Networks LinkRunner AT 1000 Network Auto-Tester
Performs connectivity tests in seconds to quickly and accurately identify and solve network problems.
<b>Quick Facts</b>
- Verification of Ethernet on copper up to 1 Gbps.
- Cable testing and fault identification.
- Powers up and is ready to test in 3 seconds.
- Store up to 10 complete test results and download to your PC with the push of a button.
<b>Further Details</b>
- User-defined AutoTest performs your required set of connectivity tests in seconds, enabling you to accurately and quickly identify and solve network problems.
- Verify connection at 10/100/1 G over copper—connect using copper, turn it on to see link status, connection type, signal strength and traffic.
- Uses IEEE Link Layer Discovery Protocol (LLDP) plus the Cisco® and Extreme Discovery Protocols (CDP and EDP) to display the VLAN and nearest switch model, slot and port.
- Quickly validate PoE performance by drawing actual power up to the 802.3at standard 25.5W.
- Use before installing cameras, APs, and phones to ensure smooth deployment.
- Verify access to secure networks using 802.1x and MAC Access Control Lists (ACL).
- The included LinkRunner Manager software configures 802.1x EAP type, downloads certificates, and enters passwords.
- Check patch cables using the built-in wiremap port including pin-to-pin connection, or installed wiring for length, shorts, opens, or split pairs.
- Designed for field use—six-hour battery life, one-handed operation, and a rugged design.
- Easy upgrades—the mini-USB port allows software upgrades in the field in minutes.
- For fiber testing, choose the LRAT-2000.
