重量和尺寸
重量 |
490 g |
深度 |
83 mm |
高度 |
50 mm |
宽度 |
142 mm |
电池
包括电池的数量 |
1 |
兼容产品型号 |
RED ONE |
电池技术 |
Lithium-Ion (Li-Ion) |
主要应用 |
Digital camcorder |
电池电压 |
14.8 V |
另外
电池容量 |
21 Wh |
产品色彩 |
Black |
电池性能 |
2100 mAh |
Battery Hot Swap system for RED ONE
- Nominal Voltage: 14.8V
- Voltage range: 10.8V ~ 16.8V
- Nominal Capacity: 1.5Ah, 21Wh
- Max. discharge current: 10A
- About up to 12~15 minutes runtime when used standalone as an UPS backup battery
- Installable on QUICKPLATE, replace the original battery plate
- Self charging through the installed battery, can be charged with a separate charging unit
- Allow data communication from battery to camera supporting the original data bus
- Size: 142 x 83 x 50mm (5.59" x 3.27" x 1.97")
- Weight: 0.49Kg (1.08lbs)
- NEW: enhanced contact protection for safer air transport
MVQUICKR is a hot-swapping interface, with the same features of MVQUICK, to be installed permanently on the existing QUICKPLATE instead of the standard battery mount.
The main purpose of this device is to allow battery replacement without power interruption to the camera through an automatic detection of the battery removal.
Best used with BLUESHAPE V-lock batteries, it support the original digital communication bus from battery to camera allowing direct communication of the runtime parameters to the LCD and viewfinder.
Additionally, MVQUICKR provides an alternative power source of about 21Wh to be used as UPS in case of a sudden power failure or extended power requirements.
High-load cell technology permits discharging of up to 10A when used as a stand alone power source.
Although the internal battery is recharged with every installation of a fresh V-lock battery pack, a separate charging unit has been provided to allow for fast and full charge when the unit is empty.
In the box:
- 1x MVQUICKR
- 1x ACDC Charging Unit
- 1x Screw set
NEW: Enhanced contact protection for safer air transport
We care and strongly respect the IATA requirements when it comes to transporting batteries. Towards this, we have adopted high quality individual packaging for every individual battery.
A recent addition is the CONTACT COVER (shown here) that we started including on every V-mount battery that comes out of our production as the ultimate protection against short circuit of the contacts.
This cover does exactly what it says and makes it virtually impossible for a short between the terminals to occur during transport. This is our latest enhancement in our list of safety features that give maximum protection, especially important during air transport.
We request our clients to store the original boxes and also the CONTACT COVERS so as to reuse them if our batteries need to be transported in any aircraft.