电池
| 电池容量 |
9 Ah |
| 电池电压 |
12 V |
| 电池更换报警 |
Audible, LED |
能量控制
| 输入工作电压(最大值) |
290 V |
| 输入工作电压(最小值) |
162 V |
| 输出功率(瓦特-安培) |
800 VA |
| 输出工作电压(最小值) |
220 V |
| 输出工作电压(最大值) |
240 V |
| 输出电压调节 |
10% |
| 输出功率 |
480 W |
端口 & 界面
| 调制解调器 (RJ-11)接口 |
1 |
| 交流电(AC)插座数量 |
2 AC outlet(s) |
性能
| 发声警报器 |
Y |
| UPS 拓扑 |
Line-Interactive |
| 电源保护功能 |
Battery discharge, Overcharge, Overload, Short circuit |
另外
| 以太网路(RJ-45)连接接口数量 |
1 |
| Schuko (欧规)插座数目 |
2 |
PowerWalker VI 800 SW, 800VA/480W, 162 - 290V AC, USB, RJ-11, RJ-45, ViewPower
A Line- Interactive UPS offers backup function and automatic voltage regulation (AVR). AVR regulates voltage to the appropriate level by decreasing it during surges or swells or increasing it during a sag or burnout. The advantage is a better protection for sensitive IT- and household equipment and avoids damage caused by voltage up- and downturn.
AVR function also benefits the battery lifetime. As long as voltage level is not lower than 70% to 90%, or higher than 110% to 125% AVR will adjust voltage to normal level. I case the voltage drops to a lower or higher level, the UPS will directly switch to battery mode to avoid dropouts and damage of the connected equipment.
Line- Interactive UPS offers USB port (RS-232) to connect to a multitude of operating systems for monitoring voltage, power and battery status.
Line- Interactive UPS are designed for medium cost application with moderate load levels
- 800VA Line-Interactive UPS
- Pure Sine Wave output power
- 2x Outlet, RJ11/RJ45 (in/out), LCD display
- USB Connection for monitoring
- Cold DC start and AVR function