技术细节
支持的耗材厚度 |
1.75 mm |
最大打印尺寸 |
297 x 310 x 200 mm |
图层厚度(最小) |
0.05 mm |
图层厚度(最大) |
0.3 mm |
端口 & 界面
USB端口 |
Y |
兼容性内存条 |
SD |
无线局域网连接 |
N |
集成读卡器 |
Y |
50 microns, 60 mm/s, PLA, LCD, USB, SD, 348W, 28kg
bq Witbox
Large print volume
The bq Witbox is a domestic printer with DIN-A4 print volume (21 x 29.7 cm) and a height of up to 20 cm, meaning it has a greater capacity to print large-scale objects and multiple parts simultaneously than any other printer.
Made by us in Spain
We manufacture the bq Witbox at our Spanish factory in Navarra, which is dedicated exclusively to the design and production of our printers. As we manufacture our own products, we’re able to enforce the very tightest quality controls, and we also apply our exacting standards to our consumables on our dedicated production line in the Spanish town of Huesca.
Where beauty and safety combine
The bq Witbox has been painstakingly designed to optimise its functionality. It’s a fully enclosed printer with a locking front door system, preventing accidental access during printing and making it a particularly safe to use around children. The fully enclosed design helps to minimise noise, while preventing heat from escaping and controlling airflow - thus maintaining a constant temperature inside the printer.
A totally innovative printing system
The bq Witbox incorporates an innovative printing system inspired by the Fibonacci spiral, using a PTFE tube to feed the filament through. Thanks to this design, the feeder system is housed within the printer unit itself, reducing the amount of contact between the filament and the tube. This optimised design, combined with the reinforced Witbox chassis, enables you to create a printer network by stacking up to three bq Witboxes one on top of the other.
3D printing of spectacular quality
Several factors affect the quality of 3D printing. One of them is the height of each layer: the lower the height, the better the level of detail and resolution of the printed object. It´s also very important for the printing base to be as level as possible. A toughened, laminated* glass base is incorporated in Witbox.
Open Source
You can run Witbox printer with a variety of open source software such as Slic3r™, Cura™, Pronterface™ and Repetier™. Enjoy greater freedom of use, greater compatibility and total technological independence.
The hardware of bq Witbox is 100% open source, meaning you can modify it and adapt it however you like. At bq we´re keen to share all our improvements, without restricting knowledge.
Support, all year round
Our commitment to our users: to be by your side for the entire life of your printer. We offer a two-year warranty for materials and labour, and in the event of an incident, we can deliver replacement parts anywhere in the world within 72 hours. We have over 150 technicians available 365 days a year, and the high quality of our support team has been recognised officially by the exclusive ISO 20000 accreditation.