For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread). For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seats head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. Its easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.
The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your vehicle. Headrest mount Attention! Please read all of the instructions and look at the pictures before attaching the head rest mount.
1. Remove the two screws in the frontside of the head rest mount using the enclosed tool, so you get two parts. Loosen the screw underneath the head rest mount so the face plate can be slided in the groove. Place the head rest mount under the head rest and adjust the face plate. Tighten the screw underneath so the face plate is locked into desired position.
2. Place one part of the head rest mount on each side of the head rest. The face plate is to be on the back side of the head rest. Put back the screws. Tighten the screws on the frontside of the head rest mount. Screw until the head rest mount is properly in place. Adjust the face plate into desired position. Tighten the screw in the face plate.
3. Installation of screen: Place the screen onto the mount. Tighten the thumb screw underneath the mount so the screen is properly in place.
4. The head rest screen mount is in place.