性能
| 发射功率（最大） |
-8 dBmW |
| 波长 |
1550 nm |
| 链路预算 |
25 dB |
| 灵敏度 |
-33 dBmW |
| 发射功率（最小） |
-14 dBmW |
| 最大传输距离 |
20000 m |
| 光纤模式结构 |
Single-mode |
联网
| 自动 MDI / MDI - X 检测功能 |
Y |
| 双机热备系统 |
Half, Full |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 以太网路(RJ-45)连接接口数量 |
1 |
| 连接方式 |
Wired |
CFT-2067SA - UTP / SM, -14.0 - -8.0 dBm Tx PWR, -33.0 dBm Rx Sensitivity, 25.0 dB Budget, SC, 1550/1310 ηm, 20 Km
Canary’s Single-Fiber Bi-Directional S i n g l e - m o d e converters deliver long-range data access over singlemode segments while using a single strand of Fiber cable. CFT-2067A/B converters are designed to freeup fiber capacity by using dual wavelengths over a single strand of a duplex fiber pair. They are ideal for data intensive backbones in the enterprise or across the campus where extra fiber capacity is lacking but redundancy or additional access is needed to add channels or alternate protocols.
CFT-2067X converters are the first in the industry to speedup Spanning Tree link recovery by employing Link Fault Signaling (LFS) technology while supporting Far-End Fault-Indication and Parallel Detection capabilities.
Canary’s Single-Fiber, Bi-Directional converters are functionally identical to standard units with the exception that units designated with an A (CFT-2067A) transmit at 1550 ηm and receive on
- Switch for Hard-Setting Full-Duplex or 100BASE-T Autonegotiation for 100 Mbs, Full and Half-duplex operation
- Internal Auto-sensing, MDI / MDI-X crossover switch for proper Network Interface Card or Switch connections
- Switch enabled Link Fault Signaling (LFS) – Forwards lost link awareness to each connected host
- Optional: UK, Continental European power
- Auto-sensing, 100 / 240 VAC Power Supply
- A full array of diagnostic LEDs
<b>Optical Specifications</b>
1310 ηm, while B (CFT-2067B) units transmit at 1310 ηm and receive on 1550 ηm. Single-Fiber converters must be connected as complementary A & B pairs. (A and B units must be ordered in pairs because every A unit must be connected to a B unit.) Similarly, standalone A & B units can be connected to complementary A & B modules used in the CCN-2000/0400 or CCM-1600 Chassis families. Canary Single-Fiber converters are available with 20 kilometer, 40 kilometer or 60 kilometer transmission ranges.
