Canary CLE-1062 100Mbit/s 1310nm Multi-mode Black network media converter

Canary CLE-1062 100Mbit/s 1310nm Multi-mode Black network media converter

MPN: CLE-1062
发送方式:
交货来源:
德国
更新价格... 📣 询问价格 Не поставляется
运输成本:
От

凡购买和价格 (Advertising *)

顶部
в наличии
* Alle Preise inkl. der jeweils geltenden gesetzlichen Mehrwertsteuer, ggfs. zzgl. Versandkosten. Alle Angaben ohne Gewähr. Preisänderungen sind in der Zwischenzeit möglich.

技术特点

顶部

能量控制

接受频率 60 Hz
外接电源转接器 Y
输入电压 120 V

性能

波长 1310 nm
链路预算 17 dB
灵敏度 -31 dBmW
发射功率(最小) -20 dBmW
最大传输距离 2000 m
光纤模式结构 Multi-mode
发射功率(最大) -14 dBmW

端口 & 界面

光纤通道端口 1
DC-IN插口 Y

设计

內置式 N

其他功能

全双工传输 Y

联网

自动 MDI / MDI - X 检测功能 Y
双机热备系统 Half, Full

另外

以太网路(RJ-45)连接接口数量 1
连接方式 Wired
数据传输率(最大) 100 Mbit/s
CLE-1062 - UTP / MM, -20.0 - -14.0 dBm Tx PWR, -31.0 dBm Rx Sensitivity, 17.0 dB Budget, ST, 1310 ηm, 2000 m Canary’s LAN Extender, CLE-106X, UTP-to-Fiber Bridging Media Converters are longtime standards for 10/100Mbs UTP media conversion to multi-mode or single-mode fiber. With the CLE-106X series, the transition between 10 Mbs and 100 Mbs is very straightforward. They easily make simple connections linking legacy 10 Mbs networks and newer 100 Mbs segments into a unified network.

Functioning as Collision Domain Extenders, a pair of CLE-106X units allows users of 100 Mbs networks containing older half-duplex equipment with distance limitations to extend their effective reach by segmenting the network into two separate 100 Mbs half-duplex collision domains. Better yet, the network can be segmented into half-duplex and fullduplex segments with a CLE-106X bridging and buffering the data traffic between them. Each segment is free to operate within its optimal performance envelope without negatively impacting each other.

- Converters are Compliant with IEEE 802.3, 802.3u 10/100 Mbs Ethernet standards
- 148,800 packets/second forwarding rate at 100 Mbs and 14,880 pps at 10 Mbs
- Switch for hard-setting (Forced) Full-duplex or Half-duplex operation on fiber port
- Models with Fiber connectors are compatible with 100BASE-FX
- Converters are transparent to Full and Half-duplex traffic
- UTP port connectors have MDI / MDI-X crossover switch
- Full array of status / diagnostic LEDs
- 512 MAC address lookup table
- Store-and-forward operation
- MAC Layer Bridge
- 5K Byte buffer
- IEEE 802.1D
- Auto-sensing, 110 / 230 VAC Power Supply
- Additional models include: Single-Fiber Bi-Directional singlemode and Extended Reach single-mode are available as special order
Фотографии

    密码恢复
    要恢复您的密码,请在下面您的电子邮件地址框与您已注册请输入:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    发生了错误。请检查您的电子邮件地址,然后再试一次。
    Ваш новый пароль:

    名称为空


    Выберите страну доставки

    您还没有写消息

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    已发送您的消息!

    親密

    1
    产品目录
    取消
    Бренды:
      Выберите бренды
        查看更多
          地區搜索
          全球
          Категории
            产品名称