Canary CMX-4021S Internal 100Mbit/s 1310nm Single-mode Black network media converter

CMX-4021S - UTP / SM, -15.0 - -18.0 dBm Tx PWR, -34.0 dBm Rx Sensitivity, 26.0 dB Budget, SC, 1310 ηm, 30 Km The CMX-4011/4012 (one Fiber optic port) and CMX-4021/4022 (two fiber optic ports) series of Managed Multi-media Switches was especially developed as work-group switches for small and medium sized businesses with the added capability of linking remote users over Fiber Optic links. They are ideal for home-office networks and when combined with MDU (Multiple Dwelling Unit) equipment, provide economical home access to centrally or metro-supplied Ethernet services. Thus, fiber cabling can be directly supplied to the user’s home (FTTH), providing him ample speed and bandwidth for a personal local area network.

Integrated MDI/MDI-X auto-crossover and 10/100 auto-negotiation capabilities make CMX-40XX deployments simple.

The CMX-40XX series is SNMP and Web Management ready, enabling managers to remotely monitor networked connections quickly and easily via the RJ-45 and Fiber (in-band) or serial RS- 232 (out-of-band) ports. Standard single-mode and Extended-Reach single-mode connectors are available that can extend enterprise LAN management and configuration to a range of 60 km. Single- Fiber Bi-Directional fiber optic connectors can be installed as special order. CMX-40XX switches are designed to be “plug-and-go” if management is unneeded.

With full SNMP and Web Management, Loopback Test capability, and Link Fault Signaling (LFS), the CMX-40XX series are highly efficient additions to networks that require managed services across the network.

The two Fiber port models (CMX-402X), in conjunction with LFS and the IEEE 802.1D Spanning Tree protocol, enable parallel Fiber link redundancy. When a disruption in the primary link takes place, the CMX-402X will redirect data along the redundant Fiber link until the primary link is restored, ensuring 'always on' connectivity.

Integrated MDI/MDI-X auto-crossover and 10/100 auto-negotiation capabilities make CMX-40XX deployments simple.

- SNMP management application software is (HP Open View© and IBM/Tivoli NetView©) capable
- Console Port and Telnet with both CLI (Command Line Interface) and Menu driven user interfaces
- Supports in-band, serial out-of-band and Web-based management
- Menu-driven management for Web browser user interface Management TFTP firmware upgradeable
- Supports 2K MAC address table entries
- Store and forward switching technology
- Per port IEEE 802.Q VLAN Tag support
- IEEE 802.3x flow control under full-duplex
- Back-pressure flow control under half-duplex Full array of status and diagnostic LED indicators
- 1MB RAM (frame) buffer with non-blocking architecture
- Loopback Test (LBK) for instant connectivity confirmation
- Bi-directional, Single-Fiber connectors available as special order
- Automatic MDI/MDI-X selection and 10/100 Auto- negotiation on RJ-45 ports
- Low power consumption design: Internal Auto-sensing 90 – 240 VAC power supply
- Link Fault Signaling (LFS) forwards ‘lost link state’ to the next station, to force a Spanning Tree response
- FCC Class A and CE approved