性能
链路预算 |
13 dB |
可支持的光纤电缆直径 |
62.5/125 µm |
灵敏度 |
-17 dBmW |
发射功率(最小) |
-9.5 dBmW |
最大传输距离 |
550 m |
光纤模式结构 |
Multi-mode |
发射功率(最大) |
-4 dBmW |
波长 |
850 nm |
联网
自动 MDI / MDI - X 检测功能 |
Y |
双机热备系统 |
Half, Full |
能量控制
接受频率 |
50/60 Hz |
输入电压 |
90-250 V |
另外
连接方式 |
Wired |
数据传输率(最大) |
1000 Mbit/s |
以太网路(RJ-45)连接接口数量 |
1 |
CN-1055 - UTP / MM, -9.5 - -4.0 dBm Tx PWR, -17.0 dBm Rx Sensitivity, 13.0 dB Budget, SC, 850 ηm, 220/550 m
Canary’s CCM-10XX Gigabit Ethernet Media Converters combine existing 100 meter Category-5(E) UTP and Fiber optic segments to deliver Gigabit data across the network. They are ideal for data intensive backbones in the enterprise or campus and can be used to take advantage of low-cost Gigabit capable switches. Use Canary’s Gigabit UTP-to-Fiber converters to economically distribute Gigabit Ethernet capacity to user desktops throughout the network as bandwidth demand increases.
Standard CN-1055 multi-mode Media Converters guarantee minimum transmission distances of 220+ meters over 62.5/125 μm fiber or 500/550+ meters (depending on bandwidth) over 50.0/ 125 μm fiber. Standard CN-1031 single-mode models provide transmission distances ranging from 10 to 70 kilometers over 9.0 μm single-mode fiber.
- 1000BASE-T Autonegotiation for Full-duplex and Half- duplex operation with Flow-Control and;
- Switch selectable, Fiber-Port Autonegotiation for common, end-to-end link awareness and Flow-Control, or for independent connection to Gigabit fiber ports on older switches
- Internal Auto-sensing, MDI / MDI-X crossover switch for Network Interface Card or Switch connections
- Transparent to Flow-Control commands such as PAUSE
- A full array of status / diagnostic LEDs