性能
| 散热 |
458 BTU/h |
| 噪音水平 |
67.9 dB |
| 并发连接 |
1000000 |
环境条件
| 非运行高度 |
0 - 4572 m |
| 工作高度 |
0 - 3048 m |
能量控制
| 输入电流 |
15 A |
| 电源供应数量 |
1 |
| 峰值功率 |
134 W |
数据传输
| 虚拟专用网通过 |
700 Mbit/s |
| 移动VPN的IPSec |
5000 |
| 移动VPN的SSL |
2 |
| IPS / IDS的吞吐量 |
1300 Mbit/s |
| 防火墙通过 |
2000 Mbit/s |
| 每秒最大防火墙连接 |
50000 |
联网
| 虚拟专用连接线接口数量 |
5000 |
| VLAN 数量 |
500 |
| 无线局域网连接 |
N |
| 用户数量 |
5000 user(s) |
另外
| 数据传输率（最大） |
4000 Mbit/s |
| 连接方式 |
Wired |
ASA 5555-X with FirePOWER Svcs. Chassis and Subs. Bundle
Problem Description
ASA 5500-X security appliances that shipped from March 16, 2012 through June 11, 2012 contain the incorrect factory default configuration. This requires the user to follow special procedures for system initialization.
Background
The ASA 5500-X appliances shipped from March 16, 2012 through June 11, 2012 were not loaded with the correct factory default configuration and must be initialized using special commands. The procedures contained in the Quick Start Guide are insufficient to properly initialize the affected units.
Problem Symptoms
Users attempting to initialize the affected ASA 5500-X appliances using the Quick Start Guide will observe that the management 0/0 ports are in the down/down condition. In addition, ASDM for on box management is not accessible.
Workaround/Solution
The factory default configuration can be applied using the following command:
config factory-default
Note that the ASA 5515-X appliance does not support the command above due to Cisco bug ID CSCtz73669. The unit must be restored to the factory default configuration using the command series shown below.
