Catalyst 4948 IOS Enhanced L3 3DES (OSPF, EIGRP, IS-IS, BGP)
<b>Per-Port, Per-VLAN Quality of Service</b>
Per-port, per-VLAN quality of service (QoS) offers differentiated quality of services to individual VLANs on a trunk or access port. It allows service providers to rate-limit individual VLAN-based services on each trunk port to a business or a residence. Per-port, per-VLAN service policy can be separately applied to either ingress or egress traffic.
<b>Trunk-Port Security</b>
Trunk-port security extends the port security to trunk ports on a per-VLAN basis. It restricts the allowed MAC addresses or the maximum number of MAC addresses to individual VLANs on a trunk port. Trunk-port security helps service providers to block the access from a station with a different MAC address than the ones specified for that VLAN on that trunk port. When a trunk-port security violation occurs, the trunk port is either shut down, or an SNMP trap is generated. Trunk-port security is also supported on private VLAN trunk ports.
<b>802.1x Private VLAN Assignment</b>
The 802.1x private VLAN (PVLAN) assignment feature extends 802.1x VLAN assignment to the PVLAN environment for Layer 2 isolation. When a port is configured as a PVLAN host port, 802.1x PVLAN assignment authorizes a user to a specified secondary PVLAN. This feature can not be enabled concurrently on a port with a voice VLAN.
<b>802.1x Private Guest VLAN</b>
The 802.1x private guest VLAN feature extends 802.1x guest VLAN to the PVLAN environment for Layer 2 isolation. When a port is configured as a PVLAN host port, 802.1x private guest VLAN offers limited network access through a guest secondary PVLAN to users without a 802.1x supplicant.
<b>802.1x RADIUS-Supplied Session Timeout</b>
The 802.1x RADIUS-supplied timeout feature allows a switch to determine the duration of a session and the action to take when the session's timer expires. Based on the value specified by a RADIUS server, a Cisco Catalyst 4500 Series Switch can reauthenticate a host when the timer expires. This offers a standard mechanism for periodic 802.1x reauthentication based on a configurable timer.
<b>Dynamic Host Configuration Protocol Option 82 Pass Through</b>
Option 82 in a Dynamic Host Configuration Protocol (DHCP) message is typically used to carry additional local information for user-access tracking. Option 82 is usually inserted or removed by an access switch or a DSL access multiplexer (DSLAM) in service provider environment. The DHCP option 82 pass-through feature helps enable the Cisco Catalyst 4900 Series to effectively transport these DHCP messages with option 82 in the aggregation layer. It can be activated through switch global configuration.
<b>Routing Information Protocol Version 2 SNMP MIB</b>
Read-only Routing Information Protocol (RIP) Version 2 SNMP MIB extension (RFC 1724) is supported. The optional peer table is not yet provided.