性能
| 数字诊断监测 (DDM) |
Y |
| 发射功率（最小） |
-9 dBmW |
| 热插拔 |
Y |
| Rx 波长（最大） |
1360 nm |
| Rx 波长（最小） |
1260 nm |
| Tx 波长（最小） |
1480 nm |
| Tx 波长（最大） |
1500 nm |
| 接收功率（最小） |
-19 dBmW |
| 接收功率（最大） |
-3 dBmW |
| 最大传输距离 |
10000 m |
| 发射功率（最大） |
-3 dBmW |
| 波长 |
1490 nm |
认证标准
| 安全 |
Laser Class I 21CFR1040 LN#50 7/2001, Laser Class I IEC 60825-1 |
环境条件
| 运行温度范围（T - T） |
32 - 158 °F |
1000BASE-BX10-D downstream bidirectional single fiber, DOM, SMF, 1490-nm TX/1310-nm RX wavelength
The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
1000BASE-BX10-D and 1000BASE-BX10-U SFP for Single-Fiber Bidirectional Applications
The 1000BASE-BX-D and 1000BASE-BX-U SFPs, compatible with the IEEE 802.3ah 1000BASE-BX10-D and 1000BASE-BX10-U standards, operate on a single strand of standard SMF.
A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard SMF with an operating transmission range up to 10 km.
The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices: 1000BASE-BX10-D transmits a 1490-nm channel and receives a 1310-nm signal, whereas 1000BASE-BX10-U transmits at a 1310-nm wavelength and receives a 1490-nm signal. Note in Figure 3 the presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1310-nm and 1490-nm light paths.
The GLC-BX-D and GLC-BX-U SFPs also support digital optical monitoring (DOM) functions according to the industry-standard SFF-8472 multisource agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
