存储介质
| 固态硬盘/固态硬盘 组合架 |
Y |
| 支持的硬盘驱动器大小 |
2.5, 3.5 " |
设计
| 支持的主板外形 |
ATX, Micro-ATX, Mini-ITX |
| 5.25" 托架数量 |
1 |
| 3.5" 托架数量 |
2 |
| 侧窗 |
Y |
| 2.5" 托架数量 |
3 |
| 最大显卡长度 |
415 mm |
| 最大CPU散热器高度 |
163 mm |
| 防灰尘过滤器 |
Y |
| 扩展插槽数 |
7 |
| 格式要素 |
Midi-Tower |
| 类型 |
PC |
冷却
| 支持的顶部风扇直径 |
120 mm |
| 支持后侧风扇散热器尺寸 |
120 mm |
| 最大前部风扇 |
2 |
| 支持的后部风扇直径 |
120 mm |
| 最大后部风扇 |
1 |
| 最大顶部风扇 |
2 |
| 安装的后部风扇 |
1x 120 mm |
| 液体冷却能力 |
Y |
| Front radiator fan sizes supported |
240 mm |
| 支持前侧风扇直径 |
120, 140 mm |
重量和尺寸
| 深度 |
453 mm |
| 重量 |
5900 g |
| 宽度 |
205 mm |
| 高度 |
458 mm |
端口 & 界面
| 音频输入 |
Y |
| 音频输出 |
Y |
| USB2.0端口的数量 |
2 |
| USB 3.0（第 1代3.1）Type-A 端口数量 |
1 |
Midi-Tower, ATX/Micro-ATX/Mini-ITX, 1x 5.25", 2x 3.5", 3x 2.5", 458 x 205 x 453 mm, 5900 g
With the NC-01, we add a solid and versatile mid-tower to our product range. It is perfect for both high-quality office computers and high-performance gaming systems. The window version has a side panel made of “tempered glass” on the left side of the case, which allows a special optical highlight for all hardware enthusiasts.
Both sides of the subtle MESH front are decorated with brushed aluminum elements and one 5.25 inch drive bay is available for external use. On the upper part of the front, you can find the I/O-Panel with 2 x USB 2.0, 1 x USB 3.0 and a fan control with two channels, as well as the obligatory audio connections. In addition, you will find the Power and HDD LEDs, as well as the power and reset buttons here.
The case is characterized by a stable and high quality steel frame - folded and deburred edges prevent the danger of cuts during the installation of the hardware. The interior is completely black and offers a generous cable management. The cover for the power supply offers several openings for cable routing as well.
The open interior design allows the easy installation of powerful hardware. A PSU cover separates the power supply and the HDD cage from the motherboard area. The guarantees the case an outstanding stability and offers a thermal separation of the power supply area and the motherboard zone with the CPU and VGA card. Finally, it offers a very tidy interior design.
A hard disk cage for two 2.5 inch or 3.5 inch HDD / SSD is hidden under the power supply cover. 3.5 inch drives can be attached tool less, smaller drives are screwed. Three additional mounting points are available for installing SSDs. Two mounting points are attached to the mainboard tray below the optical drive and one on the back of the tray.
A 120 mm fan is preinstalled at the rear of the NC-01. The ventilation system offers a lot of expansion possibilities, to provide sufficient cooling for a particularly powerful system. Behind the inner front two 120 or 140 mm fans can be installed. Two additional mounting slots for 120 mm fans are located under the top cover. A magnetic filter on the outside ensures that no dust will enter the interior. Further dust filters can be found behind the front and on the bottom.
We also considered the needs of fans of water cooling systems. The NC-01 allow the easy installation of 240 mm or 280 mm radiators. In addition, there are mounting points at the rear of the case for a compact water cooling system with a 120 mm radiator.
For the installation of the graphics cards, up to 415 mm are available in the NC-01. The maximum height for CPU coolers is 163 mm. Thus, high-performance gaming systems can be installed easily.
The NC-01 is designed for all conventional ATX power supplies. Both ATX, Micro-ATX and Mini-ITX motherboards can be installed. Seven PCI slots for expansion cards are available at the back.
