性能
| 散热设计功耗 (TDP) |
240 W |
| 适用于 |
Processor |
| 风扇数量 |
2 |
| 最大气流 |
76 cfm |
| 噪音水平（高速） |
44 dB |
| 转速（最小） |
700 RPM |
| 散热管数量 |
7 |
| 转速（最大） |
1300 RPM |
| 类型 |
Cooler |
| 风扇直径 |
140 mm |
| 散热管直径 |
6 mm |
XT140 x1 / XF140 x1, 44 dBA, 240 W +
R1 UNIVERSAL
- Performance with Compatibility
- Designed for Perfection
- The Limitless Universal Cooler
Full Contact Enhanced Performance
Patented DirectCompress™ Soldering, increases the actual contact surface between the heatpipe and heatsink fins. DirectCompress™ Soldering has up to 10% more contact surface compared to traditional soldering, and the more contact surface the faster the heat conduction.
Optimized Heatpipe Positioning Total CPU Coverage
The R1’s Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity.
Accelerated Air Exhaust The Faster the Cooler
The individual tower stack is separated into two sections, the loose air intake and the high density exhaust section. By the laws of fluid dynamics, the increase in fin count in the exhaust section squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System™ allows heated air leave the tower faster.
Spreading Out and Making Room
The R1’s Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity.
Kill the Noise Silence is Cold
Acoustics are just as important as performance. That’s why both the XF140 and XT140 140mm fan integrate acoustic optimizations. Both fans featuring High Precision Low Noise (HPLN™) bearing and the detachable Acoustic Vibration Absorbers that give the fan a snugger fit while canceling vibration and noise at the same time.
Unmatched Compatibility Zero RAM Interference
Focusing on providing the widest range of compatibility, the R1 utilizes an asymmetric slanted heatpipe layout to move the front heatsink fin stack further away from the RAM zone. Also, fitted with a 13mm thin XT140 the CRYORIG R1 offers optimal compatibility for RAM with tall heat spreaders on both Intel (115X/1366/775) and AMD platforms.
Patent Pending "MultiSeg™" Quick Mount System
Patent Pending "Multiseg™" Quick Mount System providing an all in one solution on Intel platforms, CRYORIG’s MultiSeg™ Quick Mount System allows for a securer and firmer installation within minutes.
Small Boards Tall RAM? Universal Means Compatible!
The R1 Universal is made to fit with high-end tall RAM, even on smaller ITX boards. RAM tolerance is virtually unlimited!
*Filmed on an ASUS H87I-Plus ITX board and Corsair Vengeance RAM.
