技术细节
| 外接电源转接器 |
Y |
| 视频接口类型 |
HDMI |
| 杜比技术 |
Dolby TrueHD, Dolby Digital Plus, Dolby Atmos |
| 最高操作距离 |
60 m |
| HDCP |
Y |
端口 & 界面
| 数字音频同轴i输入 |
1 |
| RJ-45输出端口 |
6 |
| RJ-45输入端口 |
1 |
| DC-IN插口 |
Y |
| HDMI输入 |
6 |
能量控制
| 电源转换器输出电压 |
24 V |
| 电源转换器输出电流 |
6.25 A |
6 x 8 HDMI HDBaseT LITE Matrix w / Audio Matricing, 4K, HDCP2.2, HDMI2.0, PoH, OAR, 60m
The PUV-662PL-4K22 HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 6 HDMI sources to 6 HDBaseT Lite outputs and 2 independent HDMI2.0 outputs. The HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
The PUV-662PL-4K22 matrix incorporates an independent audio matrix with 8 audio outputs and 4 audio inputs. These outputs and inputs can be used for de-embedding HDMI audio to feed the audio outputs and embedding this audio to the HDBaseT and HDMI outputs. In addition, volume, mute, treble, bass and audio lip-sink correction control are available on all direct audio outputs. Optical Audio Return (OAR) Technology allows the optical input on the PUV-1230PL-RX receiver to be routed back to the audio matrix.
The matrix has a built-in pattern generator which can be used to verify the video signal on any of its 8 output ports. The Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports RS232 pass-through to the receivers.
The PUV-662PL-4K22 is designed to be used with PUV-1230PL-RX or PUV-1210PL-RX receivers that can utilise the PoH capabilities of the matrix.
