扬声器
| 低音炮 |
Y |
| 低音炮 寸法 |
7 " |
| 驱动程序数量 |
2 |
| 扬声器数量 |
1 |
| 放大器 |
Built-in |
| 扬声器位置 |
Front |
| 推荐使用 |
Universal |
| Tweeter diameter |
25 mm |
音频
| 交叉频率 |
2600 Hz |
| 灵敏度 |
88 dB |
| 频率范围 |
50 - 26500 Hz |
| 阻抗 |
6 Ω |
扩音器
| 推荐放大器功率（最大） |
125 W |
| 推荐放大器功率（最小） |
25 W |
Zensor 3, 50 - 26500Hz, 108dB, 125W, Bass Reflex, 6.3kg
Zensor 3 is the newest member of the award winning ZENSOR series. This brand new speaker is developed and built to sound much larger than it actually is. Using a 7” woofer based on the technology from the ZENSOR 7 and the tweeter module from the ZENSOR 1, the ZENSOR 3 is able to recreate the high frequencies, the mid range and the low bass in the best possible way..
We have designed the cabinet so that it is large enough to deliver a sufficient, controlled and deep bass and yet is small enough to be placed on a shelf or floor stand.
The woofer cones are made from a blend of fine grained paper pulp reinforced with wood fibres. This mix makes the cones stiff and light which ensures that every micro detail in the signal is reproduced unfiltered.
The 7” woofer increases the surface area by 15% compared to a 6.5 woofer and this helps the ZENSOR 3 to deliver the same sound pressure with much less cone excursion, leading to an effortless reproduction of the dynamics in the music.
With a 4 layer voice coil magnet motor system the ZENSOR 3 produces an impressive 17% more B/L compared with speakers using the common 2 layer voice coil. A copper clad aluminum wire ensures optimal reproduction in the mid range, and the power of the magnet motor keep the bass controlled and precise.
The soft dome tweeter module has over and over again proved its ability to deliver a rich and detailed sound, and the module used in the ZENSOR 3 is no exception - delivering an extended frequency response with wide dispersion and low coloration.
