端口 & 界面
串口数量 |
1 |
交流电(AC)插座类型 |
C13 coupler, C19 coupler |
USB2.0端口的数量 |
1 |
电源插头 |
C20 coupler |
交流电(AC)插座数量 |
9 AC outlet(s) |
能量控制
输入工作电压(最大值) |
240 V |
输入工作电压(最小值) |
220 V |
紧急电源关闭(EPO) |
Y |
电源输入频率 |
47/63 Hz |
输出功率(瓦特-安培) |
3000 VA |
输出工作电压(最小值) |
220 V |
输出工作电压(最大值) |
240 V |
输出功率 |
2700 W |
电池
电池类型 |
RBC43 |
半载典型备用时间 |
11 min |
全载典型备用时间 |
3 min |
重量和尺寸
深度 |
480 mm |
重量 |
44280 g |
宽度 |
683 mm |
高度 |
86 mm |
认证标准
认证 |
C-tick, CE, EN62040-1, EN62040-2, EN60950-1, GOST, VDE |
另外
产品色彩 |
Black, Stainless steel |
Smart-UPS,2700 Watts /3000 VA,Input 230V /Output 230V, Interface Port USB, Rack Height 2 U
- Audible alarms
Provides notification of changing utility power and UPS power conditions
- Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
- Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- High online efficiency
Reduces utlility costs, generates less heat.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
- Serial connectivity
Provides management of the UPS via a serial port.
- Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- USB connectivity
Provides management of the UPS via a USB port (not available on all models).
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- StruxureWare Central compatible
Enables centralized management via StruxureWare Central.
- Disconnected battery notification
Warns when a battery is not available to provide backup power.
- Network manageable
Provides remote power management of the UPS over the network.
- Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
- Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
- Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
- Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Wide input voltage range
Designed for harsh electrical environments to save battery life.
- Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.