性能
| 可支持的光纤电缆直径 |
50/125um, 62.5/125um µm |
| 最大传输距离 |
2000 m |
| 光纤模式结构 |
Multi-mode |
| 波长 |
1310 nm |
联网
| 自动 MDI / MDI - X 检测功能 |
Y |
| 双机热备系统 |
Full |
| 存储转发 |
Y |
| 以太网的数据传输率 |
10, 100 Mbit/s |
| Auto-negotiation 自动协商功能 |
Y |
| 以太网铜缆技术 |
100BASE-TX, 10BASE-T |
| 流量控制支持 |
Y |
另外
| 包括 AC 适配器 |
Y |
| 以太网路(RJ-45)连接接口数量 |
1 |
| 连接方式 |
Wired |
| 数据传输率(最大) |
100 Mbit/s |
IEEE 802.3(u/x), 100Base-FX, SC, 50/125um, 62.5/125um, 1310nm, 2km
The FVT-2001 MMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in multi-mode with fibre-optic cabling, this can extend a network range up to 2km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode.
The FVT-2001 is able to operate in temperatures from -10° up to 55° Celsius. The converter can be used as a standalone unit or as a slide-in module to the CHV-2000 19” Converter Chassis, which can accommodate up to 14 units for use in a central wiring closet.