端口 & 界面
| 记录 |
2 |
| 线路输入（RCA） |
7 |
| 唱机输入（RCA） |
3 |
MAC 70v - 6+1 channel 19 inch mixer
The last three decades have seen over 50.000 DJs worldwide performing their music with a MAC mixer, a true legend which the MACv Series contributes to perpetuate, as it upgrades its features in accordance to the latest technological advances.
Today's discotheques, pubs, clubs, mobile systems and everywhere a pristine audio processing is required, can keep enjoying the legendary MAC Series, the most advanced, toughest and
reliable mixer around.
<b>High profile electronics</b>
The MAC series simply features today's best analogue components available in the market. The circuit boards of the MAC series have been designed with the latest generation of Surface Mounting Technology (SMD). The line faders are 60mm high-end professional slide potentiometers. Last but not least, the MAC series employs an oversized internal power supply providing the best sound dynamics and rating the most excellent signal/noise ratio.
<b>Total sound control</b>
Each channel is equipped with independent GAIN control with 20dB adjustment range, as well as a powerful 3 band tone control ranging from -20dB to 10 dB on channels 1 to 5/3, and from CUT to +10dB on all other channels.
MAC series mixers are also equipped with phantom power supply for condenser microphone (including individual internal ON/OFF settings) and assignable TALKOVER function with EFFICIENCY and RECOVERY time controls.
<b>Flexible monitoring</b>
Each channel is also equipped with pre-listening function (PFL) for headphones monitoring, which can be also done through the CUE output (with dedicated volume control) and an external amplifier.
A dual VU-Meter displays on the left prefader level of the channels which have the PFL switch activated or the main mix level when none of the PFL switches is activated, and on the right the signal level of the output selected in the section below it. If none of these switches is activated, the main mix level will be displayed.
There is independent Balance for each channel and L+R switch for summing both stereo signals.
<b>VCA crossfader</b>
The MAC 70v features the ECLER removable modular VCA crossfader. Channels 1, 3 and 5 can be assigned via the XFA switch to the A side of the crossfader. An analogue XFB switch at the even channels 2, 4 and 6 assign these signals to side B of the crossfader. In any case, when these switches are not activated, the signals are directly assigned to the main MIX bus.
